Bearings for Oil Production & Drilling National 6319-0078-00

Preload class B GB:300 N
Da max.:89 mm
Preload class A GA:150 N
r1,2 min.:1.1 mm
Preload class D GD:1200 N
Static axial stiffness, preload class B:105 N/µm
a:19.4 mm
Attainable speed for grease lubrication:17000 r/min

Product Details

Preload class B GB300 N
Da max.89 mm
Preload class A GA150 N
r1,2 min.1.1 mm
Preload class D GD1200 N
Static axial stiffness, preload class B105 N/µm
a19.4 mm
Attainable speed for grease lubrication17000 r/min
r3,4 min.0.6 mm
d170.8 mm
View more

Company Profile

Worktime 9:00-18:00(Beijing time)
Phone 0065-31591338
Fax 00852-95172259
View more

Related News

  • Vertical seats P, LP: Suitable for most transmissions and machines with shafts parallel to the mounting surface . Square seat F, FS: It is generally installed on the side wall of the machine. It has simple structure and convenient installation. It is the...
  • Deep groove ball bearings: The representative rolling bearing is widely used to withstand radial load and bidirectional axial load. It is suitable for high-speed rotation and low noise and low vibration. Pre-filled with sealed bearing with steel dust...
  • Tapered roller bearings mainly bear radial and axial combined loads. The bearing capacity of the bearing depends on the raceway angle of the outer ring. The larger the angle, the greater the load carrying capacity. This type of bearing is a split type...
  • Recommended Products

    All Products Contact Now