Bearing 3231/500G2

Sleeve:S 144x7.13/16; Threads per inch:8; G:219.151 mm; B4:35.712 mm; B:32.004 mm; Hydraulic nut:HMVC 44E; B1:183.566 mm; Lock washer:W 44; Lock nut:N 44; d1:198.438 mm;

Dimension G:0.6563 in; Pin Dia A1:0.3125 in; Weight W:2.30 lb; Insert Bearing IB:ZMaRC; Width A:1.6250 in; Dimension B:4.7500 in; Dimension D2:3.2500 in; Shaft Diameter D:1 1/2 in; Dimension N:0.7813 in; Dimension C:4.0000 in;

Material constant KM:330; Basic static load rating C0:500 kN; b1:3.9 mm; B:38 mm; dk:53 mm; d:40 mm; b:3.9 mm; d1 ≈:45 mm; rb max.:1 mm; r2 min.:1 mm;

Housing:SAFS 518; N1:23.813 mm; Adapter sleeve assembly:SNW 18x3.1/8; J min.:263.525 mm; End plug (suffix Y):EPR 11; Stabilizing ring:SR-18-15; h:38.1 mm; ba:40.481 mm; Mass pillow block:30.8 kg; R2:27.781 mm;

G:Tr 260x4; Nut for removal:HM 3052; G1:20 mm; B1:180 mm; Mass withdrawal sleeve:11.5 kg; Hydraulic nut:HMV 52 E; A:9 mm; d1:220 mm; d:240 mm; B2:195 mm;

r2 max.:0.8 mm; Mass needle roller:0.54 g; r1,2 min.:0.2 mm; Dw:2 mm; r1 max.:0.6 mm; Lw:21.8 mm;

Housing:SAFS 518; N1:23.813 mm; Adapter sleeve assembly:SNW 18x3.1/8; J min.:263.525 mm; End plug (suffix Y):EPR 11; Stabilizing ring:SR-18-15; h:38.1 mm; ba:40.481 mm; Mass pillow block:30.8 kg; R2:27.781 mm;

G:Tr 260x4; Nut for removal:HM 3052; G1:20 mm; B1:180 mm; Mass withdrawal sleeve:11.5 kg; Hydraulic nut:HMV 52 E; A:9 mm; d1:220 mm; d:240 mm; B2:195 mm;

G:Tr 260x4; Nut for removal:HM 3052; G1:20 mm; B1:180 mm; Mass withdrawal sleeve:11.5 kg; Hydraulic nut:HMV 52 E; A:9 mm; d1:220 mm; d:240 mm; B2:195 mm;

d:60.000 mm; Basic Static Radial Load Rating Co:45500 N; Basic Dynamic Radial Load Rating C:58500 N; Oil Speed Rating n2:6700 rpm; B:22.00 mm; Grease Speed Rating n1:5000 rpm; Fillet Radius ra:1.50 mm; D:110.0000 mm;

G:Tr 260x4; Nut for removal:HM 3052; G1:20 mm; B1:180 mm; Mass withdrawal sleeve:11.5 kg; Hydraulic nut:HMV 52 E; A:9 mm; d1:220 mm; d:240 mm; B2:195 mm;

Sleeve:S 144x7.13/16; Threads per inch:8; G:219.151 mm; B4:35.712 mm; B:32.004 mm; Hydraulic nut:HMVC 44E; B1:183.566 mm; Lock washer:W 44; Lock nut:N 44; d1:198.438 mm;

r2 max.:0.8 mm; Mass needle roller:0.54 g; r1,2 min.:0.2 mm; Dw:2 mm; r1 max.:0.6 mm; Lw:21.8 mm;

Sleeve:S 144x7.13/16; Threads per inch:8; G:219.151 mm; B4:35.712 mm; B:32.004 mm; Hydraulic nut:HMVC 44E; B1:183.566 mm; Lock washer:W 44; Lock nut:N 44; d1:198.438 mm;