Bearing 29476

B1:395 mm; Hydraulic nut:HMV 170 E; G2:G 1/4; G1:50 mm; Mass withdrawal sleeve:237 kg; A:15 mm; Nut for removal:HM 31/850; B2:423 mm; d:800 mm; G:Tr 850x7;

Basic Dynamic Radial Load Rating C:216100 N; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; d:200.000 mm; Oil Speed Rating n2:7300 rpm; Grease Speed Rating n1:4600 rpm; B:38.00 mm; Basic Static Radial Load Rating Co:275000 N; D:280.0000 mm;

Reference speed:2400 r/min; Da max.:119 mm; d:80 mm; Basic static load rating C0:228 kN; r1,2 min.:1.1 mm; Db max.:120 mm; Mass bearing:1.43 kg; Fatigue load limit Pu:29 kN; das:92 mm; s max.:4 mm;

Cap bolt, SAE grade:5; Appropriate attachment bolt size G:1.5 in; Bearing:23056 CCK/W33; N1:41.275 mm; Da:419.999 mm; J min.:666.75 mm; H2:101.6 mm; Eye bolt:2 x 1/2-13 UNC; Adapter sleeve assembly:SNP 3056x9.15/16; P180°:185 kN;

P180°:103 kN; Cap bolt recommended tightening torque:400 N·m; Bearing:23034 CCK/W33; A2:193.675 mm; Housing:SAF 034 KA; Ca:86.614 mm; Pa:34 kN; R2:38.1 mm; P60°:249 kN; Mass pillow block:63.9 kg;

Grease Speed Rating Open/Shielded n1:5700 rpm; Basic Static Radial Load Rating Co:34500 N; Oil Speed Rating Open/Shielded n2:7000 rpm; B:20.00 mm; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:39100 N; d:50.000 mm; D:90.0000 mm; Fillet Radius ra:1.00 mm;

Grease Speed Rating Open/Shielded n1:5700 rpm; Basic Static Radial Load Rating Co:34500 N; Oil Speed Rating Open/Shielded n2:7000 rpm; B:20.00 mm; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:39100 N; d:50.000 mm; D:90.0000 mm; Fillet Radius ra:1.00 mm;

Housing:SAF 530; Max. speed for Taconite seal:590 r/min; Ca:82.804 mm; H1:160.325 mm; Cap bolt:4 x 3/4-10 UNC; A1:158.75 mm; J1:95.25 mm; Da:269.999 mm; H2:63.5 mm; R1:95.25 mm;

Reference speed:2400 r/min; Da max.:119 mm; d:80 mm; Basic static load rating C0:228 kN; r1,2 min.:1.1 mm; Db max.:120 mm; Mass bearing:1.43 kg; Fatigue load limit Pu:29 kN; das:92 mm; s max.:4 mm;

B1:395 mm; Hydraulic nut:HMV 170 E; G2:G 1/4; G1:50 mm; Mass withdrawal sleeve:237 kg; A:15 mm; Nut for removal:HM 31/850; B2:423 mm; d:800 mm; G:Tr 850x7;

Housing:SAF 530; Max. speed for Taconite seal:590 r/min; Ca:82.804 mm; H1:160.325 mm; Cap bolt:4 x 3/4-10 UNC; A1:158.75 mm; J1:95.25 mm; Da:269.999 mm; H2:63.5 mm; R1:95.25 mm;

Grease Speed Rating n1:12000 rpm; Sealed Speed Rating n3:12000 rpm; Basic Static Radial Load Rating Co:6800 N; d:15.000 mm; Accessories:One Shield; Oil Speed Rating n2:17000 rpm; Basic Dynamic Radial Load Rating C:11400 N; B:15.9 mm; Fillet Radius ra:0.64 mm; D2R:33.200 mm;

H2:79.375 mm; J min.:549.275 mm; J max.:619.125 mm; N1:34.925 mm; P60°:416 kN; H1:200.025 mm; Appropriate attachment bolt size G:1.25 in; Pa:52.5 kN; Bearing:22238 CCK/W33; Stabilizing ring:SR-38-32;

Housing:SAF 530; Max. speed for Taconite seal:590 r/min; Ca:82.804 mm; H1:160.325 mm; Cap bolt:4 x 3/4-10 UNC; A1:158.75 mm; J1:95.25 mm; Da:269.999 mm; H2:63.5 mm; R1:95.25 mm;

Housing:SAF 530; Max. speed for Taconite seal:590 r/min; Ca:82.804 mm; H1:160.325 mm; Cap bolt:4 x 3/4-10 UNC; A1:158.75 mm; J1:95.25 mm; Da:269.999 mm; H2:63.5 mm; R1:95.25 mm;