Bearing 51164

Cap bolt, SAE grade:5; Appropriate attachment bolt size G:1.5 in; Bearing:23056 CCK/W33; N1:41.275 mm; Da:419.999 mm; J min.:666.75 mm; H2:101.6 mm; Eye bolt:2 x 1/2-13 UNC; Adapter sleeve assembly:SNP 3056x9.15/16; P180°:185 kN;

Grease Speed Rating Open/Shielded n1:5700 rpm; Basic Static Radial Load Rating Co:34500 N; Oil Speed Rating Open/Shielded n2:7000 rpm; B:20.00 mm; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:39100 N; d:50.000 mm; D:90.0000 mm; Fillet Radius ra:1.00 mm;

Housing:SAF 530; Max. speed for Taconite seal:590 r/min; Ca:82.804 mm; H1:160.325 mm; Cap bolt:4 x 3/4-10 UNC; A1:158.75 mm; J1:95.25 mm; Da:269.999 mm; H2:63.5 mm; R1:95.25 mm;

Grease Speed Rating n1:12000 rpm; Sealed Speed Rating n3:12000 rpm; Basic Static Radial Load Rating Co:6800 N; d:15.000 mm; Accessories:One Shield; Oil Speed Rating n2:17000 rpm; Basic Dynamic Radial Load Rating C:11400 N; B:15.9 mm; Fillet Radius ra:0.64 mm; D2R:33.200 mm;

Housing:SAF 530; Max. speed for Taconite seal:590 r/min; Ca:82.804 mm; H1:160.325 mm; Cap bolt:4 x 3/4-10 UNC; A1:158.75 mm; J1:95.25 mm; Da:269.999 mm; H2:63.5 mm; R1:95.25 mm;

B1:395 mm; Hydraulic nut:HMV 170 E; G2:G 1/4; G1:50 mm; Mass withdrawal sleeve:237 kg; A:15 mm; Nut for removal:HM 31/850; B2:423 mm; d:800 mm; G:Tr 850x7;

Housing:SAF 530; Max. speed for Taconite seal:590 r/min; Ca:82.804 mm; H1:160.325 mm; Cap bolt:4 x 3/4-10 UNC; A1:158.75 mm; J1:95.25 mm; Da:269.999 mm; H2:63.5 mm; R1:95.25 mm;

H2:79.375 mm; J min.:549.275 mm; J max.:619.125 mm; N1:34.925 mm; P60°:416 kN; H1:200.025 mm; Appropriate attachment bolt size G:1.25 in; Pa:52.5 kN; Bearing:22238 CCK/W33; Stabilizing ring:SR-38-32;

Mass withdrawal sleeve:0.12 kg; G1:6 mm; Nut for removal:KM 10; B1:31 mm; d:45 mm; Hydraulic nut:HMV 10 E; B2:34 mm; d1:40 mm; G:M 50x1.5;

D2 ≈:81.5 mm; Ca max.:5.33 mm; d1 ≈:66.3 mm; B:18 mm; b:2.7 mm; C:2.87 mm; Db min.:98 mm; Calculation factor kr:0.025; ra max.:1 mm; D:90 mm;

Da max.:135 mm; C:14 mm; H1:45 mm; H:40.2 mm; D2:135 mm; Mass bearing (including seat washer where applicable):2.91 kg; D1 ≈:113 mm; d1 ≈:160 mm; ra max.:1 mm; da min.:140 mm;

D2 ≈:81.5 mm; Ca max.:5.33 mm; d1 ≈:66.3 mm; B:18 mm; b:2.7 mm; C:2.87 mm; Db min.:98 mm; Calculation factor kr:0.025; ra max.:1 mm; D:90 mm;

D2 ≈:81.5 mm; Ca max.:5.33 mm; d1 ≈:66.3 mm; B:18 mm; b:2.7 mm; C:2.87 mm; Db min.:98 mm; Calculation factor kr:0.025; ra max.:1 mm; D:90 mm;

Housing:SAF 530; Max. speed for Taconite seal:590 r/min; Ca:82.804 mm; H1:160.325 mm; Cap bolt:4 x 3/4-10 UNC; A1:158.75 mm; J1:95.25 mm; Da:269.999 mm; H2:63.5 mm; R1:95.25 mm;

P180°:103 kN; Cap bolt recommended tightening torque:400 N·m; Bearing:23034 CCK/W33; A2:193.675 mm; Housing:SAF 034 KA; Ca:86.614 mm; Pa:34 kN; R2:38.1 mm; P60°:249 kN; Mass pillow block:63.9 kg;