Bearing RS-4996E4

Stabilizing ring:SR-40-34; J min.:571.5 mm; Ca:137.82 mm; S:4.763 mm; Bearing:23240 CCK/W33; da:180.975 mm; R2:46.038 mm; N1:34.925 mm; P60°:364 kN; Cap bolt, SAE grade:5;

d:120 mm; with cylindrical bore:2 000 min-1; Grease:572 kN; Pu:365 kN; Dynamic (Cr):3 mm; Oil:61.770 kN; Static (Cor):5.5 mm; rs (min):2 mm; with tapered bore:2 800 min-1; D:180 mm;

Oil Speed Rating Open/Shielded n2:11000 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:19300 N; Accessories:One Shield & Snap-Ri; D:80.0000 mm; d:25.000 mm; B:21.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Sealed Speed Rating n3:6400 rpm; Basic Dynamic Radial Load Rating C:35800 N;

A1:88.9 mm; Cap bolt:2 x 5/8-11 UNC; Mass pillow block:16.3 kg; H2:31.75 mm; Cap bolt recommended tightening torque:149.1 N·m; H1:88.9 mm; h:31.75 mm; H:169.863 mm; Stabilizing ring:SR-16-13; Adapter sleeve assembly:SNW 16x2.5/8;

d:120 mm; with cylindrical bore:2 000 min-1; Grease:572 kN; Pu:365 kN; Dynamic (Cr):3 mm; Oil:61.770 kN; Static (Cor):5.5 mm; rs (min):2 mm; with tapered bore:2 800 min-1; D:180 mm;

d:120 mm; with cylindrical bore:2 000 min-1; Grease:572 kN; Pu:365 kN; Dynamic (Cr):3 mm; Oil:61.770 kN; Static (Cor):5.5 mm; rs (min):2 mm; with tapered bore:2 800 min-1; D:180 mm;

RG:3/8 NPT; h:38.1 mm; Cap bolt recommended tightening torque:149.1 N·m; P180°:58.7 kN; P120°:53.4 kN; P60°:141 kN; db:104.775 mm; S:4.763 mm; Bearing:22218 E; Lock nut:AN 18;

G:Tr 420x5; Hydraulic nut:HMV 84 E; Mass withdrawal sleeve:36 kg; d:400 mm; d1:380 mm; A:9 mm; Nut for removal:HM 3184; B1:240 mm; B2:250 mm; G2:G 1/4;

Basic Static Radial Load Rating Co:18000 N; B:16.00 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:24700 N; Sealed Speed Rating n3:5000 rpm; Oil Speed Rating Open/Shielded n2:10000 rpm; D:80.0000 mm; d:50.000 mm; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:8500 rpm;

Stabilizing ring:SR-40-34; J min.:571.5 mm; Ca:137.82 mm; S:4.763 mm; Bearing:23240 CCK/W33; da:180.975 mm; R2:46.038 mm; N1:34.925 mm; P60°:364 kN; Cap bolt, SAE grade:5;

A1:88.9 mm; Cap bolt:2 x 5/8-11 UNC; Mass pillow block:16.3 kg; H2:31.75 mm; Cap bolt recommended tightening torque:149.1 N·m; H1:88.9 mm; h:31.75 mm; H:169.863 mm; Stabilizing ring:SR-16-13; Adapter sleeve assembly:SNW 16x2.5/8;

Mass bearing:0.34 kg; Calculation factor kr:0.03; r1,2 min.:1.1 mm; D2 ≈:63.15 mm; da max.:40.8 mm; d2 ≈:41.194 mm; Da max.:65 mm; Basic static load rating C0:16 kN; d:30 mm; Basic dynamic load rating C:29.6 kN;

B:58 mm; D1 ≈:235.2 mm; Limiting value e:0.2; Fatigue load limit Pu:81.5 kN; Basic dynamic load rating C:720 kN; d:130 mm; Mass bearing:21.4 kg; Axial load factor Y:0.6; da min.:147 mm; db min.:184 mm;

B:58 mm; D1 ≈:235.2 mm; Limiting value e:0.2; Fatigue load limit Pu:81.5 kN; Basic dynamic load rating C:720 kN; d:130 mm; Mass bearing:21.4 kg; Axial load factor Y:0.6; da min.:147 mm; db min.:184 mm;

G:Tr 670x6; A:9 mm; d1:600 mm; G2:G 1/4; d:630 mm; Nut for removal:HM 31/670; G1:40 mm; Hydraulic nut:HMV 134 E; B2:356 mm; Mass withdrawal sleeve:101 kg;