Bearing EE526132/526190

Bolt Pattern C:0.55 in; Travel:18; Height G:3.438 in; Frame Size A:4 41/64 in; Frame Accepts These Shaft Sizes (Bearing Bore):30 mm, 35 mm; Bolt Pattern D:2 3/4 in; Frame Size B:24 in; Shaft C/L Distance F:1 27/32 in; Length H:0.500 in; Bolt Pattern E:22 1/2 in;

H:258.762 mm; Max. speed for PosiTrac Plus seal:1650 r/min; da:87.313 mm; R1:79.375 mm; Housing:SAF 620; Labyrinth ring:2 x LOR 102; A2:187.325 mm; Cap bolt, SAE grade:8; S:4.763 mm; Initial grease fill:379.89 g;

static Cor:760.000 kN; Pu:22.070 kN; D1:223 mm; Grease:1 000 min-1; dynamic Cr:200.090 kN; d:220 mm; D:270 mm; H:37 mm; Oil:1 300 min-1; d1:267 mm;

d:140 mm; r3,4 min.:4 mm; Mass angle ring:2.15 kg; d1 ≈:195.6 mm; B2:31 mm; B1:15 mm;

d:85.000 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; Oil Speed Rating Open/Shielded n2:5000 rpm; Sealed Speed Rating n3:2800 rpm; Accessories:Two Seals & Snap-Rin; Basic Static Radial Load Rating Co:64000 N; Basic Dynamic Radial Load Rating C:83200 N; B:28.00 mm; Oil Speed Rating n2:5000 rpm; Fillet Radius ra:2.00 mm;

Bolt Pattern C:0.55 in; Travel:18; Height G:3.438 in; Frame Size A:4 41/64 in; Frame Accepts These Shaft Sizes (Bearing Bore):30 mm, 35 mm; Bolt Pattern D:2 3/4 in; Frame Size B:24 in; Shaft C/L Distance F:1 27/32 in; Length H:0.500 in; Bolt Pattern E:22 1/2 in;

Pu:1160 kN; Static (Cor):16.7 mm; B:98 mm; D:360 mm; Dynamic (Cr):9 mm; with tapered bore:1 100 min-1; d:200 mm; with cylindrical bore:890 min-1; Oil:157.600 kN; rs (min):4 mm;

Stabilizing ring:2 x 38151-40; A1:171.45 mm; P120°:85.9 kN; Bearing:23040 CCK/W33; Pa:48.9 kN; J max.:549.275 mm; Ca:95.809 mm; Mass pillow block:117 kg; N1:28.575 mm; P150°:77 kN;

Pu:1160 kN; Static (Cor):16.7 mm; B:98 mm; D:360 mm; Dynamic (Cr):9 mm; with tapered bore:1 100 min-1; d:200 mm; with cylindrical bore:890 min-1; Oil:157.600 kN; rs (min):4 mm;

Pu:1160 kN; Static (Cor):16.7 mm; B:98 mm; D:360 mm; Dynamic (Cr):9 mm; with tapered bore:1 100 min-1; d:200 mm; with cylindrical bore:890 min-1; Oil:157.600 kN; rs (min):4 mm;

Stabilizing ring:2 x 38151-40; A1:171.45 mm; P120°:85.9 kN; Bearing:23040 CCK/W33; Pa:48.9 kN; J max.:549.275 mm; Ca:95.809 mm; Mass pillow block:117 kg; N1:28.575 mm; P150°:77 kN;