Bearing 74525/74846X

Basic Radial Load Rating-Dynamic DC:3320 N; Fillet Radius ra:0.30 mm; Width - Outer Ring B0:8.0 mm; Width - Inner Ring B1:9.80 mm; Basic Interchange NDH:87037; Basic Interchange FAF:37KLD; Basic Interchange BCA:-; Old MRC Bearing Number:37FSF1; Speed Rating-Single and Double Sealed Grease SDG:23000 rpm; Accessories:87000 Shield & Seal;

Bolt Pattern C:0.55 in; Travel:18; Height G:3.438 in; Frame Size A:4 41/64 in; Frame Accepts These Shaft Sizes (Bearing Bore):30 mm, 35 mm; Bolt Pattern D:2 3/4 in; Frame Size B:24 in; Shaft C/L Distance F:1 27/32 in; Length H:0.500 in; Bolt Pattern E:22 1/2 in;

d:85.000 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; Oil Speed Rating Open/Shielded n2:5000 rpm; Sealed Speed Rating n3:2800 rpm; Accessories:Two Seals & Snap-Rin; Basic Static Radial Load Rating Co:64000 N; Basic Dynamic Radial Load Rating C:83200 N; B:28.00 mm; Oil Speed Rating n2:5000 rpm; Fillet Radius ra:2.00 mm;

static Cor:760.000 kN; Pu:22.070 kN; D1:223 mm; Grease:1 000 min-1; dynamic Cr:200.090 kN; d:220 mm; D:270 mm; H:37 mm; Oil:1 300 min-1; d1:267 mm;

Basic static load rating C0:400 kN; l5 ≈:35 mm; w:70 mm; α:6 °; B:44 mm; d2 max.:137 mm; l3 min.:70 mm; Material constant KM:330; h1:175 mm; l4 max.:246 mm;

Limiting speed:1100 r/min; D1:144 mm; Mass bearing:29.7 kg; B:28.5 mm; Housing washer:GS 89428; ra max.:4 mm; Fatigue load limit Pu:425 kN; D:280 mm; Da max.:157 mm; d1:280 mm;

d:100.000 mm; Fillet Radius ra:2.00 mm; D:180.0000 mm; Grease Speed Rating n1:2600 rpm; B:68.00 mm; Oil Speed Rating n2:3300 rpm; Basic Static Radial Load Rating Co:260000 N; Basic Dynamic Radial Load Rating C:225000 N; Fillet Radius rb:1.00 mm;

d:85.000 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; Oil Speed Rating Open/Shielded n2:5000 rpm; Sealed Speed Rating n3:2800 rpm; Accessories:Two Seals & Snap-Rin; Basic Static Radial Load Rating Co:64000 N; Basic Dynamic Radial Load Rating C:83200 N; B:28.00 mm; Oil Speed Rating n2:5000 rpm; Fillet Radius ra:2.00 mm;

Basic static load rating C0:400 kN; l5 ≈:35 mm; w:70 mm; α:6 °; B:44 mm; d2 max.:137 mm; l3 min.:70 mm; Material constant KM:330; h1:175 mm; l4 max.:246 mm;

Hydraulic nut:HMVC 68E; d3 max.:400.177 mm; d:340 mm; B1:191.338 mm; Threads per inch:5; Sleeve:S 3068x12.7/16; d1:315.913 mm; G:337.896 mm; B5:55.016 mm; B:45.491 mm;