Bearing 93750/93125

d:85.000 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; Oil Speed Rating Open/Shielded n2:5000 rpm; Sealed Speed Rating n3:2800 rpm; Accessories:Two Seals & Snap-Rin; Basic Static Radial Load Rating Co:64000 N; Basic Dynamic Radial Load Rating C:83200 N; B:28.00 mm; Oil Speed Rating n2:5000 rpm; Fillet Radius ra:2.00 mm;

da:80 mm; Housing:SAFS 216; R1:53.181 mm; H:174.625 mm; Cap bolt:2 x 5/8-11 UNC; S:4.763 mm; ba:34.131 mm; H2:31.75 mm; PG:1/8 NPT; Mass pillow block:20.4 kg;

Basic static load rating C0:400 kN; l5 ≈:35 mm; w:70 mm; α:6 °; B:44 mm; d2 max.:137 mm; l3 min.:70 mm; Material constant KM:330; h1:175 mm; l4 max.:246 mm;

Hydraulic nut:HMVC 68E; d3 max.:400.177 mm; d:340 mm; B1:191.338 mm; Threads per inch:5; Sleeve:S 3068x12.7/16; d1:315.913 mm; G:337.896 mm; B5:55.016 mm; B:45.491 mm;

H:258.762 mm; Max. speed for PosiTrac Plus seal:1650 r/min; da:87.313 mm; R1:79.375 mm; Housing:SAF 620; Labyrinth ring:2 x LOR 102; A2:187.325 mm; Cap bolt, SAE grade:8; S:4.763 mm; Initial grease fill:379.89 g;

static Cor:760.000 kN; Pu:22.070 kN; D1:223 mm; Grease:1 000 min-1; dynamic Cr:200.090 kN; d:220 mm; D:270 mm; H:37 mm; Oil:1 300 min-1; d1:267 mm;

Hydraulic nut:HMVC 68E; d3 max.:400.177 mm; d:340 mm; B1:191.338 mm; Threads per inch:5; Sleeve:S 3068x12.7/16; d1:315.913 mm; G:337.896 mm; B5:55.016 mm; B:45.491 mm;

da:80 mm; Housing:SAFS 216; R1:53.181 mm; H:174.625 mm; Cap bolt:2 x 5/8-11 UNC; S:4.763 mm; ba:34.131 mm; H2:31.75 mm; PG:1/8 NPT; Mass pillow block:20.4 kg;

d:140 mm; r3,4 min.:4 mm; Mass angle ring:2.15 kg; d1 ≈:195.6 mm; B2:31 mm; B1:15 mm;

Basic Radial Load Rating-Dynamic DC:3320 N; Fillet Radius ra:0.30 mm; Width - Outer Ring B0:8.0 mm; Width - Inner Ring B1:9.80 mm; Basic Interchange NDH:87037; Basic Interchange FAF:37KLD; Basic Interchange BCA:-; Old MRC Bearing Number:37FSF1; Speed Rating-Single and Double Sealed Grease SDG:23000 rpm; Accessories:87000 Shield & Seal;

da:80 mm; Housing:SAFS 216; R1:53.181 mm; H:174.625 mm; Cap bolt:2 x 5/8-11 UNC; S:4.763 mm; ba:34.131 mm; H2:31.75 mm; PG:1/8 NPT; Mass pillow block:20.4 kg;

Basic static load rating C0:400 kN; l5 ≈:35 mm; w:70 mm; α:6 °; B:44 mm; d2 max.:137 mm; l3 min.:70 mm; Material constant KM:330; h1:175 mm; l4 max.:246 mm;