Bearing 80170/80222

d:140 mm; r3,4 min.:4 mm; Mass angle ring:2.15 kg; d1 ≈:195.6 mm; B2:31 mm; B1:15 mm;

Basic Radial Load Rating-Dynamic DC:3320 N; Fillet Radius ra:0.30 mm; Width - Outer Ring B0:8.0 mm; Width - Inner Ring B1:9.80 mm; Basic Interchange NDH:87037; Basic Interchange FAF:37KLD; Basic Interchange BCA:-; Old MRC Bearing Number:37FSF1; Speed Rating-Single and Double Sealed Grease SDG:23000 rpm; Accessories:87000 Shield & Seal;

static Cor:760.000 kN; Pu:22.070 kN; D1:223 mm; Grease:1 000 min-1; dynamic Cr:200.090 kN; d:220 mm; D:270 mm; H:37 mm; Oil:1 300 min-1; d1:267 mm;

da:80 mm; Housing:SAFS 216; R1:53.181 mm; H:174.625 mm; Cap bolt:2 x 5/8-11 UNC; S:4.763 mm; ba:34.131 mm; H2:31.75 mm; PG:1/8 NPT; Mass pillow block:20.4 kg;

Bolt Pattern C:0.55 in; Travel:18; Height G:3.438 in; Frame Size A:4 41/64 in; Frame Accepts These Shaft Sizes (Bearing Bore):30 mm, 35 mm; Bolt Pattern D:2 3/4 in; Frame Size B:24 in; Shaft C/L Distance F:1 27/32 in; Length H:0.500 in; Bolt Pattern E:22 1/2 in;

Pu:1160 kN; Static (Cor):16.7 mm; B:98 mm; D:360 mm; Dynamic (Cr):9 mm; with tapered bore:1 100 min-1; d:200 mm; with cylindrical bore:890 min-1; Oil:157.600 kN; rs (min):4 mm;

Pu:1160 kN; Static (Cor):16.7 mm; B:98 mm; D:360 mm; Dynamic (Cr):9 mm; with tapered bore:1 100 min-1; d:200 mm; with cylindrical bore:890 min-1; Oil:157.600 kN; rs (min):4 mm;

Pu:1160 kN; Static (Cor):16.7 mm; B:98 mm; D:360 mm; Dynamic (Cr):9 mm; with tapered bore:1 100 min-1; d:200 mm; with cylindrical bore:890 min-1; Oil:157.600 kN; rs (min):4 mm;

Stabilizing ring:2 x 38151-40; A1:171.45 mm; P120°:85.9 kN; Bearing:23040 CCK/W33; Pa:48.9 kN; J max.:549.275 mm; Ca:95.809 mm; Mass pillow block:117 kg; N1:28.575 mm; P150°:77 kN;

da:80 mm; Housing:SAFS 216; R1:53.181 mm; H:174.625 mm; Cap bolt:2 x 5/8-11 UNC; S:4.763 mm; ba:34.131 mm; H2:31.75 mm; PG:1/8 NPT; Mass pillow block:20.4 kg;

Basic static load rating C0:400 kN; l5 ≈:35 mm; w:70 mm; α:6 °; B:44 mm; d2 max.:137 mm; l3 min.:70 mm; Material constant KM:330; h1:175 mm; l4 max.:246 mm;

Limiting speed:1100 r/min; D1:144 mm; Mass bearing:29.7 kg; B:28.5 mm; Housing washer:GS 89428; ra max.:4 mm; Fatigue load limit Pu:425 kN; D:280 mm; Da max.:157 mm; d1:280 mm;

static Cor:760.000 kN; Pu:22.070 kN; D1:223 mm; Grease:1 000 min-1; dynamic Cr:200.090 kN; d:220 mm; D:270 mm; H:37 mm; Oil:1 300 min-1; d1:267 mm;