Bearing 99537/99100

H:258.762 mm; Max. speed for PosiTrac Plus seal:1650 r/min; da:87.313 mm; R1:79.375 mm; Housing:SAF 620; Labyrinth ring:2 x LOR 102; A2:187.325 mm; Cap bolt, SAE grade:8; S:4.763 mm; Initial grease fill:379.89 g;

Pu:1160 kN; Static (Cor):16.7 mm; B:98 mm; D:360 mm; Dynamic (Cr):9 mm; with tapered bore:1 100 min-1; d:200 mm; with cylindrical bore:890 min-1; Oil:157.600 kN; rs (min):4 mm;

Limiting speed:1100 r/min; D1:144 mm; Mass bearing:29.7 kg; B:28.5 mm; Housing washer:GS 89428; ra max.:4 mm; Fatigue load limit Pu:425 kN; D:280 mm; Da max.:157 mm; d1:280 mm;

Hydraulic nut:HMVC 68E; d3 max.:400.177 mm; d:340 mm; B1:191.338 mm; Threads per inch:5; Sleeve:S 3068x12.7/16; d1:315.913 mm; G:337.896 mm; B5:55.016 mm; B:45.491 mm;

Stabilizing ring:2 x 38151-40; A1:171.45 mm; P120°:85.9 kN; Bearing:23040 CCK/W33; Pa:48.9 kN; J max.:549.275 mm; Ca:95.809 mm; Mass pillow block:117 kg; N1:28.575 mm; P150°:77 kN;

d:100.000 mm; Fillet Radius ra:2.00 mm; D:180.0000 mm; Grease Speed Rating n1:2600 rpm; B:68.00 mm; Oil Speed Rating n2:3300 rpm; Basic Static Radial Load Rating Co:260000 N; Basic Dynamic Radial Load Rating C:225000 N; Fillet Radius rb:1.00 mm;

static Cor:760.000 kN; Pu:22.070 kN; D1:223 mm; Grease:1 000 min-1; dynamic Cr:200.090 kN; d:220 mm; D:270 mm; H:37 mm; Oil:1 300 min-1; d1:267 mm;

static Cor:760.000 kN; Pu:22.070 kN; D1:223 mm; Grease:1 000 min-1; dynamic Cr:200.090 kN; d:220 mm; D:270 mm; H:37 mm; Oil:1 300 min-1; d1:267 mm;

Hydraulic nut:HMVC 68E; d3 max.:400.177 mm; d:340 mm; B1:191.338 mm; Threads per inch:5; Sleeve:S 3068x12.7/16; d1:315.913 mm; G:337.896 mm; B5:55.016 mm; B:45.491 mm;

d:140 mm; r3,4 min.:4 mm; Mass angle ring:2.15 kg; d1 ≈:195.6 mm; B2:31 mm; B1:15 mm;

d:100.000 mm; Fillet Radius ra:2.00 mm; D:180.0000 mm; Grease Speed Rating n1:2600 rpm; B:68.00 mm; Oil Speed Rating n2:3300 rpm; Basic Static Radial Load Rating Co:260000 N; Basic Dynamic Radial Load Rating C:225000 N; Fillet Radius rb:1.00 mm;