YUKEN A70-F-L-04-H-S-K-32             

Adapter sleeve assembly:SNW 3032x5.3/8; Cap bolt recommended tightening torque:1220 N·m; Stabilizing ring:2 x 38151-32; End plug (suffix Y):EPR 16; h:51.594 mm; J min.:371.475 mm; P180°:84.5 kN; L:466.725 mm; R2:36.513 mm; RG:1/2 NPT;

P150°:250 kN; Lock washer:MB 17; H:218 mm; N1:18 mm; Q150°:360 kN; Q180°:310 kN; L:380 mm; N4 max.:8 mm; P120°:280 kN; Mass housing:17.6 kg;

da max.:111 mm; r3,4 min.:3.5 mm; d:100 mm; Calculation factor e:0.33; db min.:117.5 mm; Db min.:151 mm; a:31.706 mm; Ca min.:7 mm; d1 ≈:127.1 mm; Da min.:140 mm;

d4 ≈:92 mm; Mass rod end:9.5 kg; Basic dynamic load rating C:880 kN; Basic static load rating C0:530 kN; l7 min.:80 mm; h1:200 mm; Specific dynamic load factor K:300 N/mm²; l3 min.:80 mm; r1 min.:1 mm; dk:92 mm;

Basic static load rating C0:41.5 kN; Reference speed:10000 r/min; s max.:0.8 mm; db:39.5 mm; ra max.:0.3 mm; Limiting speed:12000 r/min; Mass bearing:0.11 kg; d:35 mm; Db:40.6 mm; r1,2 min.:0.3 mm;

D:290 mm; rs (min):2.1 mm; Oil:122.860 kN; d:190 mm; with cylindrical bore:940 min-1; with tapered bore:1 200 min-1; B:75 mm; Dynamic (Cr):6 mm; Static (Cor):11.1 mm; Grease:1310 kN;

Da max.:19.9 mm; da max.:15.9 mm; D:22.225 mm; Specific dynamic load factor K:100 N/mm²; r2 min.:0.6 mm; b:2.6 mm; d:12.7 mm; dk:18.263 mm; rb max.:0.6 mm; b1:2.5 mm;

Adapter sleeve assembly:SNW 3032x5.3/8; Cap bolt recommended tightening torque:1220 N·m; Stabilizing ring:2 x 38151-32; End plug (suffix Y):EPR 16; h:51.594 mm; J min.:371.475 mm; P180°:84.5 kN; L:466.725 mm; R2:36.513 mm; RG:1/2 NPT;

Basic static load rating C0:41.5 kN; Reference speed:10000 r/min; s max.:0.8 mm; db:39.5 mm; ra max.:0.3 mm; Limiting speed:12000 r/min; Mass bearing:0.11 kg; d:35 mm; Db:40.6 mm; r1,2 min.:0.3 mm;

Cap bolt, rec. tightening torque:600 N·m; s:30 mm; Lock nut:HM 3172; End cover:ETS 80; Q120°:4200 kN; H:695 mm; P150°:2400 kN; P120°:2700 kN; A1:360 mm; ba max.:203 mm;

D:290 mm; rs (min):2.1 mm; Oil:122.860 kN; d:190 mm; with cylindrical bore:940 min-1; with tapered bore:1 200 min-1; B:75 mm; Dynamic (Cr):6 mm; Static (Cor):11.1 mm; Grease:1310 kN;

Cap bolt, rec. tightening torque:600 N·m; s:30 mm; Lock nut:HM 3172; End cover:ETS 80; Q120°:4200 kN; H:695 mm; P150°:2400 kN; P120°:2700 kN; A1:360 mm; ba max.:203 mm;

Adapter sleeve assembly:SNW 3032x5.3/8; Cap bolt recommended tightening torque:1220 N·m; Stabilizing ring:2 x 38151-32; End plug (suffix Y):EPR 16; h:51.594 mm; J min.:371.475 mm; P180°:84.5 kN; L:466.725 mm; R2:36.513 mm; RG:1/2 NPT;

da max.:111 mm; r3,4 min.:3.5 mm; d:100 mm; Calculation factor e:0.33; db min.:117.5 mm; Db min.:151 mm; a:31.706 mm; Ca min.:7 mm; d1 ≈:127.1 mm; Da min.:140 mm;

Adapter sleeve assembly:SNW 3032x5.3/8; Cap bolt recommended tightening torque:1220 N·m; Stabilizing ring:2 x 38151-32; End plug (suffix Y):EPR 16; h:51.594 mm; J min.:371.475 mm; P180°:84.5 kN; L:466.725 mm; R2:36.513 mm; RG:1/2 NPT;