Bearing 29436

Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3800 rpm; B:58.00 mm; Basic Static Radial Load Rating Co:110000 N; D:120.0000 mm; Oil Speed Rating n2:5000 rpm; d:45.000 mm; Basic Dynamic Radial Load Rating C:138000 N;

Oil Speed Rating Open/Shielded n2:29000 rpm; d:12.700 mm; Fillet Radius ra:0.41 mm; D:28.6000 mm; Basic Static Radial Load Rating Co:2400 N; Sealed Speed Rating n3:16000 rpm; Basic Dynamic Radial Load Rating C:5070 N; Shielded or Sealed B1:7.9 mm; Width Plain B:6.4 mm; Accessories:Two Seals;

Cap bolt:2 x 3/4-10 UNC; h:45.244 mm; J1:69.85 mm; da:96.838 mm; ba:50.006 mm; Pa:17.3 kN; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; P180°:60.9 kN; Bearing limiting speed:4000 r/min;

B:34.00 mm; Accessories:Seal & Snap-Ring; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:93000 N; Oil Speed Rating n2:4000 rpm; Grease Speed Rating n1:3400 rpm; d:100.000 mm; Sealed Speed Rating n3:2400 rpm; D:180.0000 mm; Oil Speed Rating Open/Shielded n2:4000 rpm;

a:31.2 mm; Preload class B GB:610 N; Calculation factor (back-to-back, face-to-face) Y0:0.76; Mass bearing:0.61 kg; Basic static load rating C0:17.3 kN; Preload class A GA:200 N; Calculation factor f1:0.99; Preload class C GC:1220 N; Attainable speed for grease lubrication:15500 r/min; Calculation factor f2C:1.06;

P150°:77 kN; h:54.769 mm; Housing:SAW 534; J min.:492.125 mm; S:4.763 mm; H:360.363 mm; P60°:234 kN; Pa:56 kN; J1:107.95 mm; PosiTrac Plus contact element:2 x B10724-130;

Basic static load rating C0:15.3 kN; B1:39.5 mm; RG:1/4-28 UNF; J7:15 mm; J6:106 mm; Basic dynamic load rating C:25.5 kN; L:96 mm; d2:57 mm; H:156 mm; Recommended tightening torque for grub screw:4 N·m;

Basic dynamic load rating C:77 kN; B:73.025 mm; da:42.862 mm; Mass bearing unit:4.22 kg; d2:68.659 mm; Limiting speed:1600 r/min; H1:53.975 mm; J min.:155.575 mm; A1:78.581 mm; S:0.794 mm;

Basic dynamic load rating C:77 kN; B:73.025 mm; da:42.862 mm; Mass bearing unit:4.22 kg; d2:68.659 mm; Limiting speed:1600 r/min; H1:53.975 mm; J min.:155.575 mm; A1:78.581 mm; S:0.794 mm;

R2:30.163 mm; J1:69.85 mm; P180°:81.4 kN; Cap bolt:2 x 1-8 UNC; Cap bolt, SAE grade:8; A2:254 mm; H2:53.975 mm; Ca:82.804 mm; P60°:185 kN; Bearing:1320 K;

M3:22 mm; M:21 mm; M1:7 mm; Spring washer in accordance with DIN 128:A 20; B:50 mm; Hexagonal head bolt:M 20x40; M2:61 mm; Mass locking clip:0.27 kg;

Basic static load rating C0:15.3 kN; B1:39.5 mm; RG:1/4-28 UNF; J7:15 mm; J6:106 mm; Basic dynamic load rating C:25.5 kN; L:96 mm; d2:57 mm; H:156 mm; Recommended tightening torque for grub screw:4 N·m;

Basic Dynamic Radial Load Rating C:33800 N; Grease Speed Rating n1:6700 rpm; Basic Static Radial Load Rating Co:11200 N; B:23.00 mm; d:40.000 mm; D:90.0000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:8000 rpm;

Oil Speed Rating Open/Shielded n2:29000 rpm; d:12.700 mm; Fillet Radius ra:0.41 mm; D:28.6000 mm; Basic Static Radial Load Rating Co:2400 N; Sealed Speed Rating n3:16000 rpm; Basic Dynamic Radial Load Rating C:5070 N; Shielded or Sealed B1:7.9 mm; Width Plain B:6.4 mm; Accessories:Two Seals;