Bearing EE529091D-157-158XD

B:23 mm; d:50 mm; rs Dynamic (Cr):1.1 mm; Pu:8.410 kN; with tapered bore:2210  ; B1:mm; Oil:7 100 min-1; with cylindrical bore:8 400 min-1; Static (Cor):24.000 kN; D:90 mm;

Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; Specific static load factor K0:45 N/mm²; Coefficient of friction µ max.:0.15; α:124 °; Permissible sliding velocity v max.:0.5 m/s; B:160 mm; Permissible sliding velocity v min.:0 m/s; h:172 mm; d:170 mm;

B:23 mm; d:50 mm; rs Dynamic (Cr):1.1 mm; Pu:8.410 kN; with tapered bore:2210  ; B1:mm; Oil:7 100 min-1; with cylindrical bore:8 400 min-1; Static (Cor):24.000 kN; D:90 mm;

da:71.438 mm; PG:1/4 NPT; Adapter sleeve assembly:SNW 117x2.13/16; A1:111.125 mm; P60°:94.3 kN; R2:30.163 mm; Mass pillow block:31.4 kg; Pa:10.5 kN; PosiTrac Plus contact element:2 x B10724-184; Labyrinth ring:2 x LOR 182;

da:71.438 mm; PG:1/4 NPT; Adapter sleeve assembly:SNW 117x2.13/16; A1:111.125 mm; P60°:94.3 kN; R2:30.163 mm; Mass pillow block:31.4 kg; Pa:10.5 kN; PosiTrac Plus contact element:2 x B10724-184; Labyrinth ring:2 x LOR 182;

rs (min):2.3 mm; E:mm; F:182 mm; d2:150 mm; r1s (min):2.3 mm; b1:mm; Pu:123.000 kN; D:270 mm; d2 (max):mm; Dynamic (Ca):736 kN;

B:23 mm; d:50 mm; rs Dynamic (Cr):1.1 mm; Pu:8.410 kN; with tapered bore:2210  ; B1:mm; Oil:7 100 min-1; with cylindrical bore:8 400 min-1; Static (Cor):24.000 kN; D:90 mm;

B:23 mm; d:50 mm; rs Dynamic (Cr):1.1 mm; Pu:8.410 kN; with tapered bore:2210  ; B1:mm; Oil:7 100 min-1; with cylindrical bore:8 400 min-1; Static (Cor):24.000 kN; D:90 mm;

P180°:57.4 kN; Adapter sleeve assembly:SNW 3024x4.1/8; PG:1/4 NPT; R2:30.163 mm; H:222.25 mm; Ca:55.804 mm; Initial grease fill:181.44 g; Pa:16.7 kN; RG:3/8 NPT; R1:65.088 mm;

P180°:57.4 kN; Adapter sleeve assembly:SNW 3024x4.1/8; PG:1/4 NPT; R2:30.163 mm; H:222.25 mm; Ca:55.804 mm; Initial grease fill:181.44 g; Pa:16.7 kN; RG:3/8 NPT; R1:65.088 mm;

rs (min):2.3 mm; E:mm; F:182 mm; d2:150 mm; r1s (min):2.3 mm; b1:mm; Pu:123.000 kN; D:270 mm; d2 (max):mm; Dynamic (Ca):736 kN;

Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2800 rpm; Sealed Speed Rating n3:2800 rpm; Oil Speed Rating n2:3800 rpm; Basic Dynamic Radial Load Rating C:106000 N; Accessories:No Shield, no Seal,; B:44.40 mm; d:80.000 mm; Basic Static Radial Load Rating Co:95000 N; D:140.0000 mm;

A2:41.275 mm; P60°:101 kN; L:349.25 mm; Mass pillow block:23.1 kg; Bearing:23218 CCK/W33; P120°:38.3 kN; Housing:SAW 518; da:82.55 mm; S:4.763 mm; P150°:34.7 kN;

A5:29.369 mm; Basic dynamic load rating C:73.8 kN; d2:62.706 mm; A1:73.819 mm; A:58.737 mm; Limiting speed:5100 r/min; A6:19.05 mm; Mass bearing unit:4.54 kg; N1:14.287 mm; L:136.525 mm;

Basic Dynamic Radial Load Rating C:48800 N; d:55.000 mm; Grease Speed Rating n1:5600 rpm; B:21.00 mm; Oil Speed Rating n2:7500 rpm; Fillet Radius rb:1.00 mm; D:100.0000 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:37500 N;