Bearing L521949DE-910-910DE

Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; Specific static load factor K0:45 N/mm²; Coefficient of friction µ max.:0.15; α:124 °; Permissible sliding velocity v max.:0.5 m/s; B:160 mm; Permissible sliding velocity v min.:0 m/s; h:172 mm; d:170 mm;

P180°:57.4 kN; Adapter sleeve assembly:SNW 3024x4.1/8; PG:1/4 NPT; R2:30.163 mm; H:222.25 mm; Ca:55.804 mm; Initial grease fill:181.44 g; Pa:16.7 kN; RG:3/8 NPT; R1:65.088 mm;

B:22.00 mm; Oil Speed Rating Open/Shielded n2:6000 rpm; d:85.000 mm; Basic Dynamic Radial Load Rating C:52700 N; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:3000 rpm; Basic Static Radial Load Rating Co:45000 N; D:130.0000 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; Accessories:Without Accessories;

P150°:26.7 kN; End plug (suffix Y):EPR 9; A1:88.9 mm; Mass pillow block:24.5 kg; R2:22.225 mm; da:76.2 mm; H:187.325 mm; RG:3/8 NPT; H1:95.25 mm; S:4.763 mm;

A2:153.194 mm; P150°:40 kN; ba:38.894 mm; J min.:295.275 mm; PosiTrac Plus contact element:2 x B10724-102; PG:1/4 NPT; Bearing:1220 K; Housing:FSAF 520; P120°:44.5 kN; Cap bolt recommended tightening torque:203.4 N·m;

H:34 mm; d:170 mm; Grease:1 200 min-1; dynamic Cr:160.140 kN; static Cor:582.000 kN; rs (min):1.1 mm; D:215 mm; d1:213 mm; D1:172 mm; Oil:1 600 min-1;

P150°:26.7 kN; End plug (suffix Y):EPR 9; A1:88.9 mm; Mass pillow block:24.5 kg; R2:22.225 mm; da:76.2 mm; H:187.325 mm; RG:3/8 NPT; H1:95.25 mm; S:4.763 mm;

P150°:26.7 kN; End plug (suffix Y):EPR 9; A1:88.9 mm; Mass pillow block:24.5 kg; R2:22.225 mm; da:76.2 mm; H:187.325 mm; RG:3/8 NPT; H1:95.25 mm; S:4.763 mm;

P180°:57.4 kN; Adapter sleeve assembly:SNW 3024x4.1/8; PG:1/4 NPT; R2:30.163 mm; H:222.25 mm; Ca:55.804 mm; Initial grease fill:181.44 g; Pa:16.7 kN; RG:3/8 NPT; R1:65.088 mm;

A5:29.369 mm; Basic dynamic load rating C:73.8 kN; d2:62.706 mm; A1:73.819 mm; A:58.737 mm; Limiting speed:5100 r/min; A6:19.05 mm; Mass bearing unit:4.54 kg; N1:14.287 mm; L:136.525 mm;

α:6 °; h:265 mm; l7 min.:85 mm; Basic static load rating C0:490 kN; r1 min.:1 mm; Specific dynamic load factor K:300 N/mm²; B:49 mm; dk:92 mm; C1 max.:43 mm; d2 max.:162 mm;

A2:41.275 mm; P60°:101 kN; L:349.25 mm; Mass pillow block:23.1 kg; Bearing:23218 CCK/W33; P120°:38.3 kN; Housing:SAW 518; da:82.55 mm; S:4.763 mm; P150°:34.7 kN;

H:34 mm; d:170 mm; Grease:1 200 min-1; dynamic Cr:160.140 kN; static Cor:582.000 kN; rs (min):1.1 mm; D:215 mm; d1:213 mm; D1:172 mm; Oil:1 600 min-1;

H:34 mm; d:170 mm; Grease:1 200 min-1; dynamic Cr:160.140 kN; static Cor:582.000 kN; rs (min):1.1 mm; D:215 mm; d1:213 mm; D1:172 mm; Oil:1 600 min-1;

A5:29.369 mm; Basic dynamic load rating C:73.8 kN; d2:62.706 mm; A1:73.819 mm; A:58.737 mm; Limiting speed:5100 r/min; A6:19.05 mm; Mass bearing unit:4.54 kg; N1:14.287 mm; L:136.525 mm;