Bearing 762KV1052

P180°:57.4 kN; Adapter sleeve assembly:SNW 3024x4.1/8; PG:1/4 NPT; R2:30.163 mm; H:222.25 mm; Ca:55.804 mm; Initial grease fill:181.44 g; Pa:16.7 kN; RG:3/8 NPT; R1:65.088 mm;

α:6 °; h:265 mm; l7 min.:85 mm; Basic static load rating C0:490 kN; r1 min.:1 mm; Specific dynamic load factor K:300 N/mm²; B:49 mm; dk:92 mm; C1 max.:43 mm; d2 max.:162 mm;

B:23 mm; d:50 mm; rs Dynamic (Cr):1.1 mm; Pu:8.410 kN; with tapered bore:2210  ; B1:mm; Oil:7 100 min-1; with cylindrical bore:8 400 min-1; Static (Cor):24.000 kN; D:90 mm;

B:23 mm; d:50 mm; rs Dynamic (Cr):1.1 mm; Pu:8.410 kN; with tapered bore:2210  ; B1:mm; Oil:7 100 min-1; with cylindrical bore:8 400 min-1; Static (Cor):24.000 kN; D:90 mm;

rs (min):2.3 mm; E:mm; F:182 mm; d2:150 mm; r1s (min):2.3 mm; b1:mm; Pu:123.000 kN; D:270 mm; d2 (max):mm; Dynamic (Ca):736 kN;

α:6 °; h:265 mm; l7 min.:85 mm; Basic static load rating C0:490 kN; r1 min.:1 mm; Specific dynamic load factor K:300 N/mm²; B:49 mm; dk:92 mm; C1 max.:43 mm; d2 max.:162 mm;

da:71.438 mm; PG:1/4 NPT; Adapter sleeve assembly:SNW 117x2.13/16; A1:111.125 mm; P60°:94.3 kN; R2:30.163 mm; Mass pillow block:31.4 kg; Pa:10.5 kN; PosiTrac Plus contact element:2 x B10724-184; Labyrinth ring:2 x LOR 182;

B:23 mm; d:50 mm; rs Dynamic (Cr):1.1 mm; Pu:8.410 kN; with tapered bore:2210  ; B1:mm; Oil:7 100 min-1; with cylindrical bore:8 400 min-1; Static (Cor):24.000 kN; D:90 mm;

A2:153.194 mm; P150°:40 kN; ba:38.894 mm; J min.:295.275 mm; PosiTrac Plus contact element:2 x B10724-102; PG:1/4 NPT; Bearing:1220 K; Housing:FSAF 520; P120°:44.5 kN; Cap bolt recommended tightening torque:203.4 N·m;

B:23 mm; d:50 mm; rs Dynamic (Cr):1.1 mm; Pu:8.410 kN; with tapered bore:2210  ; B1:mm; Oil:7 100 min-1; with cylindrical bore:8 400 min-1; Static (Cor):24.000 kN; D:90 mm;

P180°:57.4 kN; Adapter sleeve assembly:SNW 3024x4.1/8; PG:1/4 NPT; R2:30.163 mm; H:222.25 mm; Ca:55.804 mm; Initial grease fill:181.44 g; Pa:16.7 kN; RG:3/8 NPT; R1:65.088 mm;

A2:41.275 mm; P60°:101 kN; L:349.25 mm; Mass pillow block:23.1 kg; Bearing:23218 CCK/W33; P120°:38.3 kN; Housing:SAW 518; da:82.55 mm; S:4.763 mm; P150°:34.7 kN;

P150°:26.7 kN; End plug (suffix Y):EPR 9; A1:88.9 mm; Mass pillow block:24.5 kg; R2:22.225 mm; da:76.2 mm; H:187.325 mm; RG:3/8 NPT; H1:95.25 mm; S:4.763 mm;

α:6 °; h:265 mm; l7 min.:85 mm; Basic static load rating C0:490 kN; r1 min.:1 mm; Specific dynamic load factor K:300 N/mm²; B:49 mm; dk:92 mm; C1 max.:43 mm; d2 max.:162 mm;

Basic Dynamic Radial Load Rating C:48800 N; d:55.000 mm; Grease Speed Rating n1:5600 rpm; B:21.00 mm; Oil Speed Rating n2:7500 rpm; Fillet Radius rb:1.00 mm; D:100.0000 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:37500 N;