Bearing ZR33-13

N4 max.:20 mm; Pa:1100 kN; Cap bolt, rec. tightening torque:400 N·m; A:300 mm; H1:240 mm; L:700 mm; P0°:3400 kN; bc:141.5 mm; J:600 mm; P120°:1500 kN;

da:100.013 mm; s:41.275 mm; A6:31.75 mm; J:196.85 mm; A5:46.831 mm; A:88.9 mm; Limiting speed:2100 r/min; L:247.65 mm; N1:23.813 mm; Mass bearing unit:31.3 kg;

d:25.4 mm; s1:19.8 mm; Mass bearing unit:0.31 kg; T:41.6 mm; N:10.7 mm; End cover:ECL 205; A5:22.2 mm; Thread grub screw G2:1/4-28 UNF; B4:5 mm; Hexagonal key size for grub screw N:3.175 mm;

Static (Coa):570 kN; rs (min):3 mm; d2:105 mm; Dynamic (Ca):393 kN; B:50 mm; Pu:61.550 kN; D:190 mm; C:43 mm; a:44 mm; T:53 mm;

d:25.4 mm; s1:19.8 mm; Mass bearing unit:0.31 kg; T:41.6 mm; N:10.7 mm; End cover:ECL 205; A5:22.2 mm; Thread grub screw G2:1/4-28 UNF; B4:5 mm; Hexagonal key size for grub screw N:3.175 mm;

Static (Coa):570 kN; rs (min):3 mm; d2:105 mm; Dynamic (Ca):393 kN; B:50 mm; Pu:61.550 kN; D:190 mm; C:43 mm; a:44 mm; T:53 mm;

End plug (suffix Y):EPR 10; Initial grease fill:365.71 g; PG:1/8 NPT; H1:107.95 mm; Cap bolt:2 x 3/4-10 UNC; A1:98.425 mm; h:46.038 mm; Adapter sleeve assembly:SNW 16x2.11/16; H2:44.45 mm; N1:19.05 mm;

End plug (suffix Y):EPR 10; Initial grease fill:365.71 g; PG:1/8 NPT; H1:107.95 mm; Cap bolt:2 x 3/4-10 UNC; A1:98.425 mm; h:46.038 mm; Adapter sleeve assembly:SNW 16x2.11/16; H2:44.45 mm; N1:19.05 mm;

Pu:6.680 kN; with cylindrical bore:11 000 min-1; Static (Cor):22.350 kN; Oil:9 400 min-1; B:23 mm; B1:mm; rs Dynamic (Cr):1.1 mm; D:72 mm; Grease:0.300 kN; d:35 mm;

Lock nut:KML 32; G:M 160x3; Mass adapter sleeve assembly:8.8 kg; d3:190 mm; Hydraulic nut:HMV 32 E; d:160 mm; d1:139.7 mm; B4:27.5 mm; Locking device:MBL 32; B:25 mm;

Lock nut:KML 32; G:M 160x3; Mass adapter sleeve assembly:8.8 kg; d3:190 mm; Hydraulic nut:HMV 32 E; d:160 mm; d1:139.7 mm; B4:27.5 mm; Locking device:MBL 32; B:25 mm;

α:6 °; Basic dynamic load rating C:156 kN; d:50 mm; Mass rod end:3.3 kg; r1 min.:0.6 mm; C1 max.:31 mm; l7 min.:58 mm; dk:66 mm; Basic static load rating C0:245 kN; G:M 45x3;

da:100.013 mm; s:41.275 mm; A6:31.75 mm; J:196.85 mm; A5:46.831 mm; A:88.9 mm; Limiting speed:2100 r/min; L:247.65 mm; N1:23.813 mm; Mass bearing unit:31.3 kg;

N4 max.:20 mm; Pa:1100 kN; Cap bolt, rec. tightening torque:400 N·m; A:300 mm; H1:240 mm; L:700 mm; P0°:3400 kN; bc:141.5 mm; J:600 mm; P120°:1500 kN;