Bearing ZR22B-40

End plug (suffix Y):EPR 10; Initial grease fill:365.71 g; PG:1/8 NPT; H1:107.95 mm; Cap bolt:2 x 3/4-10 UNC; A1:98.425 mm; h:46.038 mm; Adapter sleeve assembly:SNW 16x2.11/16; H2:44.45 mm; N1:19.05 mm;

T:18.25 mm; Dynamic (Ca):39.8 kN; r2s (min):0.6 mm; rs (min):1.5 mm; C:15 mm; Pu:4.670 kN; Static (Coa):38.3 kN; d2:25 mm; a:13 mm; B:17 mm;

End plug (suffix Y):EPR 10; Initial grease fill:365.71 g; PG:1/8 NPT; H1:107.95 mm; Cap bolt:2 x 3/4-10 UNC; A1:98.425 mm; h:46.038 mm; Adapter sleeve assembly:SNW 16x2.11/16; H2:44.45 mm; N1:19.05 mm;

End plug (suffix Y):EPR 10; Initial grease fill:365.71 g; PG:1/8 NPT; H1:107.95 mm; Cap bolt:2 x 3/4-10 UNC; A1:98.425 mm; h:46.038 mm; Adapter sleeve assembly:SNW 16x2.11/16; H2:44.45 mm; N1:19.05 mm;

ba max.:203 mm; Q180°:2100 kN; Q120°:4200 kN; Lock washer:MS 3080-76; d2:581 mm; bb:166 mm; N:50 mm; Cap bolt, rec. tightening torque:600 N·m; da:400 mm; A:400 mm;

T:18.25 mm; Dynamic (Ca):39.8 kN; r2s (min):0.6 mm; rs (min):1.5 mm; C:15 mm; Pu:4.670 kN; Static (Coa):38.3 kN; d2:25 mm; a:13 mm; B:17 mm;

Basic static load rating C0:3750 kN; K:12 mm; da min.:291 mm; d2 ≈:333 mm; B1:155 mm; Calculation factor e:0.26; ra max.:4 mm; Mass bearing + sleeve:125 kg; Da max.:480 mm; D1 ≈:441 mm;

T:18.25 mm; Dynamic (Ca):39.8 kN; r2s (min):0.6 mm; rs (min):1.5 mm; C:15 mm; Pu:4.670 kN; Static (Coa):38.3 kN; d2:25 mm; a:13 mm; B:17 mm;

d:25.4 mm; s1:19.8 mm; Mass bearing unit:0.31 kg; T:41.6 mm; N:10.7 mm; End cover:ECL 205; A5:22.2 mm; Thread grub screw G2:1/4-28 UNF; B4:5 mm; Hexagonal key size for grub screw N:3.175 mm;

N4 max.:20 mm; Pa:1100 kN; Cap bolt, rec. tightening torque:400 N·m; A:300 mm; H1:240 mm; L:700 mm; P0°:3400 kN; bc:141.5 mm; J:600 mm; P120°:1500 kN;

d:25.4 mm; s1:19.8 mm; Mass bearing unit:0.31 kg; T:41.6 mm; N:10.7 mm; End cover:ECL 205; A5:22.2 mm; Thread grub screw G2:1/4-28 UNF; B4:5 mm; Hexagonal key size for grub screw N:3.175 mm;

End plug (suffix Y):EPR 10; Initial grease fill:365.71 g; PG:1/8 NPT; H1:107.95 mm; Cap bolt:2 x 3/4-10 UNC; A1:98.425 mm; h:46.038 mm; Adapter sleeve assembly:SNW 16x2.11/16; H2:44.45 mm; N1:19.05 mm;

T:18.25 mm; Dynamic (Ca):39.8 kN; r2s (min):0.6 mm; rs (min):1.5 mm; C:15 mm; Pu:4.670 kN; Static (Coa):38.3 kN; d2:25 mm; a:13 mm; B:17 mm;

ba max.:203 mm; Q180°:2100 kN; Q120°:4200 kN; Lock washer:MS 3080-76; d2:581 mm; bb:166 mm; N:50 mm; Cap bolt, rec. tightening torque:600 N·m; da:400 mm; A:400 mm;