Bearing 3PL130-2C

T:18.25 mm; Dynamic (Ca):39.8 kN; r2s (min):0.6 mm; rs (min):1.5 mm; C:15 mm; Pu:4.670 kN; Static (Coa):38.3 kN; d2:25 mm; a:13 mm; B:17 mm;

ba max.:203 mm; Q180°:2100 kN; Q120°:4200 kN; Lock washer:MS 3080-76; d2:581 mm; bb:166 mm; N:50 mm; Cap bolt, rec. tightening torque:600 N·m; da:400 mm; A:400 mm;

Basic static load rating C0:3750 kN; K:12 mm; da min.:291 mm; d2 ≈:333 mm; B1:155 mm; Calculation factor e:0.26; ra max.:4 mm; Mass bearing + sleeve:125 kg; Da max.:480 mm; D1 ≈:441 mm;

Static (Coa):570 kN; rs (min):3 mm; d2:105 mm; Dynamic (Ca):393 kN; B:50 mm; Pu:61.550 kN; D:190 mm; C:43 mm; a:44 mm; T:53 mm;

End plug (suffix Y):EPR 10; Initial grease fill:365.71 g; PG:1/8 NPT; H1:107.95 mm; Cap bolt:2 x 3/4-10 UNC; A1:98.425 mm; h:46.038 mm; Adapter sleeve assembly:SNW 16x2.11/16; H2:44.45 mm; N1:19.05 mm;

Basic static load rating C0:1560 kN; α:4 °; b1:7.7 mm; D:105 mm; C:40 mm; Specific dynamic load factor K:100 N/mm²; Sealing solution:Triple-lip seals; Specific static load factor K0:500 N/mm²; d:70 mm; b:7.7 mm;

Lock nut:KML 32; G:M 160x3; Mass adapter sleeve assembly:8.8 kg; d3:190 mm; Hydraulic nut:HMV 32 E; d:160 mm; d1:139.7 mm; B4:27.5 mm; Locking device:MBL 32; B:25 mm;

Pu:6.680 kN; with cylindrical bore:11 000 min-1; Static (Cor):22.350 kN; Oil:9 400 min-1; B:23 mm; B1:mm; rs Dynamic (Cr):1.1 mm; D:72 mm; Grease:0.300 kN; d:35 mm;

Basic dynamic load rating C:245 kN; Mass bearing:2.33 kg; Calculation factor Y0:0.9; Db min.:111 mm; Dimension series:2FD; Da max.:110.5 mm; T:45.5 mm; ra max.:2.5 mm; Reference speed:4300 r/min; da max.:68 mm;

Basic static load rating C0:1560 kN; α:4 °; b1:7.7 mm; D:105 mm; C:40 mm; Specific dynamic load factor K:100 N/mm²; Sealing solution:Triple-lip seals; Specific static load factor K0:500 N/mm²; d:70 mm; b:7.7 mm;

T:18.25 mm; Dynamic (Ca):39.8 kN; r2s (min):0.6 mm; rs (min):1.5 mm; C:15 mm; Pu:4.670 kN; Static (Coa):38.3 kN; d2:25 mm; a:13 mm; B:17 mm;

T:18.25 mm; Dynamic (Ca):39.8 kN; r2s (min):0.6 mm; rs (min):1.5 mm; C:15 mm; Pu:4.670 kN; Static (Coa):38.3 kN; d2:25 mm; a:13 mm; B:17 mm;

N4 max.:20 mm; Pa:1100 kN; Cap bolt, rec. tightening torque:400 N·m; A:300 mm; H1:240 mm; L:700 mm; P0°:3400 kN; bc:141.5 mm; J:600 mm; P120°:1500 kN;

End plug (suffix Y):EPR 10; Initial grease fill:365.71 g; PG:1/8 NPT; H1:107.95 mm; Cap bolt:2 x 3/4-10 UNC; A1:98.425 mm; h:46.038 mm; Adapter sleeve assembly:SNW 16x2.11/16; H2:44.45 mm; N1:19.05 mm;