[QTY 4] (30x37x4 mm) 6706-2RS HYBRID CERAMIC Si3N4 Ball Bearing Bearings 6706RS

Attachment bolt diameter G:19.05 mm; S:0.794 mm; A1:123.825 mm; Basic dynamic load rating C:253 kN; J1:60.325 mm; H1:95.25 mm; A:114.3 mm; H:190.5 mm; L:355.6 mm; B:102.394 mm;

d:220 mm; B:32.004 mm; d1:198.438 mm; B4:35.712 mm; Mass adapter sleeve assembly:21 kg; Sleeve:S 144x7.13/16; Threads per inch:8; Lock washer:W 44; B1:183.566 mm; G:219.151 mm;

B:26.00 mm; d:15.000 mm; Grease Speed Rating n1:13000 rpm; D:42.0000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:21600 N; Oil Speed Rating n2:17000 rpm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:14300 N;

Mass bearing unit:24 kg; L:320.278 mm; d2:152.4 mm; A:88.9 mm; Basic dynamic load rating C:311 kN; J:273.05 mm; N1:23.813 mm; A6:28.575 mm; A5:46.831 mm; Limiting speed:700 r/min;

da:8.2 min; Da:17 max; d:6 mm; ra:0.3 max; Pu:0.049 kN; Dynamic (Cr):2.838 kN; Grease:35 000 min-1; rs:0.3 mm; Static (Cor):1.078 kN; D:19 mm;

d:220 mm; B:32.004 mm; d1:198.438 mm; B4:35.712 mm; Mass adapter sleeve assembly:21 kg; Sleeve:S 144x7.13/16; Threads per inch:8; Lock washer:W 44; B1:183.566 mm; G:219.151 mm;

d:220 mm; B:32.004 mm; d1:198.438 mm; B4:35.712 mm; Mass adapter sleeve assembly:21 kg; Sleeve:S 144x7.13/16; Threads per inch:8; Lock washer:W 44; B1:183.566 mm; G:219.151 mm;

da:8.2 min; Da:17 max; d:6 mm; ra:0.3 max; Pu:0.049 kN; Dynamic (Cr):2.838 kN; Grease:35 000 min-1; rs:0.3 mm; Static (Cor):1.078 kN; D:19 mm;

Basic Dynamic Radial Load Rating C:78000 N; B:26.00 mm; d:80.000 mm; Basic Static Radial Load Rating Co:71000 N; Fillet Radius ra:1.50 mm; D:140.0000 mm; Oil Speed Rating n2:5300 rpm; Grease Speed Rating n1:4100 rpm;

Oil Speed Rating Open/Shielded n2:3000 rpm; Grease Speed Rating Open/Shielded n1:2500 rpm; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:198000 N; D:225.0000 mm; B:54.00 mm; Basic Static Radial Load Rating Co:212000 N; Fillet Radius ra:3.00 mm; d:90.000 mm;

d:220 mm; B:32.004 mm; d1:198.438 mm; B4:35.712 mm; Mass adapter sleeve assembly:21 kg; Sleeve:S 144x7.13/16; Threads per inch:8; Lock washer:W 44; B1:183.566 mm; G:219.151 mm;

da:26 min; Static (Cor):7.811 kN; Pu:0.355 kN; Da:45 max; Grease:14 000 min-1; ra:1 max; Weight:0.2 kg; B:21 mm; Bearing designation:62304  ; Dynamic (Cr):15.866 kN;

Max. speed for PosiTrac Plus seal:2600 r/min; Pa:9.43 kN; N1:19.05 mm; da:57.15 mm; H1:88.9 mm; Cap bolt:2 x 5/8-11 UNC; P60°:60.5 kN; End plug (suffix Y):EPR 7; Adapter sleeve assembly:SNW 113x2.1/4; Cap bolt recommended tightening torque:298.3 N·m;

d:220 mm; B:32.004 mm; d1:198.438 mm; B4:35.712 mm; Mass adapter sleeve assembly:21 kg; Sleeve:S 144x7.13/16; Threads per inch:8; Lock washer:W 44; B1:183.566 mm; G:219.151 mm;

R1:53.181 mm; J max.:279.4 mm; Housing:FSAF 613; Max. speed for Taconite seal:1400 r/min; Initial grease fill:175.77 g; J min.:244.475 mm; N1:19.05 mm; H1:88.9 mm; Taconite seal:TER 33; da:57.15 mm;