Yamaha PW 50 A 1990 Koyo Front Left Wheel Bearing

S:4.763 mm; Labyrinth ring:2 x LOR 124; P60°:394 kN; Eye bolt:2 x 3/8-16 UNC; h:50.8 mm; Cap bolt:7/8-9 UNC; J1:95.25 mm; Pa:32.7 kN; Bearing:22230 CCK/W33; Bearing limiting speed:3000 r/min;

Accessories:Two Shields & Snap-R; Grease Speed Rating Open/Shielded n1:3100 rpm; Fillet Radius ra:2.50 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; d:85.000 mm; Basic Static Radial Load Rating Co:146000 N; D:180.0000 mm; Basic Dynamic Radial Load Rating C:147000 N; B:41.00 mm;

α:6 °; b:5.7 mm; Lubricant:Regular relubricatio; C:42.85 mm; da max.:65.2 mm; D:90.488 mm; Mass plain bearing:1.3 kg; b1:5 mm; d:57.15 mm; Basic static load rating C0:850 kN;

Dw:5 mm; Lw:23.8 mm; r1,2 min.:0.3 mm; r2 max.:1 mm; Mass needle roller:3.67 g; r1 max.:0.8 mm;

B:17 mm; r1,2 min.:2 mm; d1:160 mm; d:75 mm; Mass shaft washer:0.5 kg;

d:65 mm; with tapered bore:2313  ; Grease:1.470 kN; B:48 mm; B1:mm; with cylindrical bore:4 800 min-1; D:140 mm; Pu:32.400 kN; rs Dynamic (Cr):2.1 mm; Static (Cor):98.880 kN;

Bearing (basic designation):23284; H:880 mm; L:1280 mm; Locating ring:2 x FRB 5/760; N4 max.:40 mm; P0°:8400 kN; ba min.:231 mm; Q180°:2900 kN; Q150°:3350 kN; Mass housing:850 kg;

d:65 mm; with tapered bore:2313  ; Grease:1.470 kN; B:48 mm; B1:mm; with cylindrical bore:4 800 min-1; D:140 mm; Pu:32.400 kN; rs Dynamic (Cr):2.1 mm; Static (Cor):98.880 kN;

Bearing (basic designation):23284; H:880 mm; L:1280 mm; Locating ring:2 x FRB 5/760; N4 max.:40 mm; P0°:8400 kN; ba min.:231 mm; Q180°:2900 kN; Q150°:3350 kN; Mass housing:850 kg;

B:130.00 mm; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:2100 rpm; d:150.000 mm; Basic Static Radial Load Rating Co:865000 N; D:320.0000 mm; Basic Dynamic Radial Load Rating C:559000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:1600 rpm;

Specific dynamic load factor K:150 N/mm²; b1:3.9 mm; da min.:38.8 mm; r1 min.:0.6 mm; C:22 mm; Material constant KM:330; Da min.:54.5 mm; Mass plain bearing:0.39 kg; α:15 °; b:3.9 mm;

d:40  ; da:49 min; a:58 mm; d:40 mm; Pu:2.709 kN; Static (Cor):59.600 kN; rs (min):1.5 mm; Oil:5 600 min-1; Dynamic (Cr):59.431 kN; Da:81 max;

Hydraulic nut:HMVC 80E; Mass adapter sleeve assembly:75 kg; B1:321.412 mm; Locking plate:PL 80; G:399.009 mm; Sleeve:S 3280x15; B:52.654 mm; d1:381 mm; d3 max.:470.027 mm; Lock nut:N 080;

Specific dynamic load factor K:150 N/mm²; b1:3.9 mm; da min.:38.8 mm; r1 min.:0.6 mm; C:22 mm; Material constant KM:330; Da min.:54.5 mm; Mass plain bearing:0.39 kg; α:15 °; b:3.9 mm;

d:65 mm; with tapered bore:2313  ; Grease:1.470 kN; B:48 mm; B1:mm; with cylindrical bore:4 800 min-1; D:140 mm; Pu:32.400 kN; rs Dynamic (Cr):2.1 mm; Static (Cor):98.880 kN;