Yamaha QT50 J (MA 50 M) 1982 Koyo Front Left Wheel Bearing

Housing:FSAF 520; L:387.35 mm; P180°:48.9 kN; J1:60.325 mm; P60°:119 kN; Bearing limiting speed:4500 r/min; Cap bolt recommended tightening torque:203.4 N·m; Bearing:22220 EK; P150°:40 kN; PG:1/4 NPT;

d:180 mm; H:34 mm; dynamic Cr:165.640 kN; Grease:1 100 min-1; Oil:1 500 min-1; rs (min):1.1 mm; Pu:20.410 kN; D1:185 mm; static Cor:639.000 kN; D:225 mm;

b1:42.6 mm; Pu:175.330 kN; b:19.6 mm; Dynamic (Ca):1470 kN; rs (min):5 mm; B:90 mm; r1s (min):5 mm; d2 (max):470 mm; E:mm; D:600 mm;

Basic Static Radial Load Rating Co:65500 N; Accessories:Shield & Seal; d:105.000 mm; Grease Speed Rating Open/Shielded n1:4000 rpm; B:26.00 mm; D:160.0000 mm; Basic Dynamic Radial Load Rating C:79300 N; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:4800 rpm; Sealed Speed Rating n3:2400 rpm;

P90°:82.7 kN; Appropriate attachment bolt size G:0.75 in; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; H2:31.75 mm; A2:215.9 mm; P120°:49.8 kN; Ca:42.799 mm; Pa:7.83 kN; R1:53.181 mm;

d:180 mm; H:34 mm; dynamic Cr:165.640 kN; Grease:1 100 min-1; Oil:1 500 min-1; rs (min):1.1 mm; Pu:20.410 kN; D1:185 mm; static Cor:639.000 kN; D:225 mm;

b1:42.6 mm; Pu:175.330 kN; b:19.6 mm; Dynamic (Ca):1470 kN; rs (min):5 mm; B:90 mm; r1s (min):5 mm; d2 (max):470 mm; E:mm; D:600 mm;

Taconite seal:TER 122; Initial grease fill:878.85 g; da:125.412 mm; Mass pillow block:134 kg; Adapter sleeve assembly:SNW 128x4.15/16; Cap bolt, SAE grade:5; A2:307.975 mm; N1:28.575 mm; P60°:234 kN; S:4.763 mm;

rs Dynamic (Cr):2.1 mm; Static (Cor):81.680 kN; D:160 mm; B1:mm; B:37 mm; d:75 mm; with tapered bore:1315  ; Oil:3 800 min-1; Pu:29.900 kN; Grease:1.230 kN;

D:200 mm; Dynamic (Cr):4.5 mm; with cylindrical bore:1 700 min-1; Oil:50.680 kN; B:53 mm; Pu:365 kN; rs (min):2.1 mm; Grease:474 kN; d:110 mm; Static (Cor):8.3 mm;

Basic Static Radial Load Rating Co:65500 N; Accessories:Shield & Seal; d:105.000 mm; Grease Speed Rating Open/Shielded n1:4000 rpm; B:26.00 mm; D:160.0000 mm; Basic Dynamic Radial Load Rating C:79300 N; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:4800 rpm; Sealed Speed Rating n3:2400 rpm;

b1:42.6 mm; Pu:175.330 kN; b:19.6 mm; Dynamic (Ca):1470 kN; rs (min):5 mm; B:90 mm; r1s (min):5 mm; d2 (max):470 mm; E:mm; D:600 mm;

b1:42.6 mm; Pu:175.330 kN; b:19.6 mm; Dynamic (Ca):1470 kN; rs (min):5 mm; B:90 mm; r1s (min):5 mm; d2 (max):470 mm; E:mm; D:600 mm;

d:180 mm; H:34 mm; dynamic Cr:165.640 kN; Grease:1 100 min-1; Oil:1 500 min-1; rs (min):1.1 mm; Pu:20.410 kN; D1:185 mm; static Cor:639.000 kN; D:225 mm;

D:200 mm; Dynamic (Cr):4.5 mm; with cylindrical bore:1 700 min-1; Oil:50.680 kN; B:53 mm; Pu:365 kN; rs (min):2.1 mm; Grease:474 kN; d:110 mm; Static (Cor):8.3 mm;