Yamaha YFS 200 B Blaster 1991 Koyo Rear Right Wheel Bearing

P90°:82.7 kN; Appropriate attachment bolt size G:0.75 in; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; H2:31.75 mm; A2:215.9 mm; P120°:49.8 kN; Ca:42.799 mm; Pa:7.83 kN; R1:53.181 mm;

Taconite seal:TER 122; Initial grease fill:878.85 g; da:125.412 mm; Mass pillow block:134 kg; Adapter sleeve assembly:SNW 128x4.15/16; Cap bolt, SAE grade:5; A2:307.975 mm; N1:28.575 mm; P60°:234 kN; S:4.763 mm;

D:200 mm; Dynamic (Cr):4.5 mm; with cylindrical bore:1 700 min-1; Oil:50.680 kN; B:53 mm; Pu:365 kN; rs (min):2.1 mm; Grease:474 kN; d:110 mm; Static (Cor):8.3 mm;

b1:42.6 mm; Pu:175.330 kN; b:19.6 mm; Dynamic (Ca):1470 kN; rs (min):5 mm; B:90 mm; r1s (min):5 mm; d2 (max):470 mm; E:mm; D:600 mm;

Housing:FSAF 520; L:387.35 mm; P180°:48.9 kN; J1:60.325 mm; P60°:119 kN; Bearing limiting speed:4500 r/min; Cap bolt recommended tightening torque:203.4 N·m; Bearing:22220 EK; P150°:40 kN; PG:1/4 NPT;

Da max.:580 mm; F:422 mm; Calculation factor kr:0.36; d:360 mm; s max.:5.9 mm; da max.:414 mm; Reference speed:900 r/min; Mass bearing:275 kg; D:600 mm; Limiting speed:1100 r/min;

Taconite seal:TER 122; Initial grease fill:878.85 g; da:125.412 mm; Mass pillow block:134 kg; Adapter sleeve assembly:SNW 128x4.15/16; Cap bolt, SAE grade:5; A2:307.975 mm; N1:28.575 mm; P60°:234 kN; S:4.763 mm;

Housing:FSAF 520; L:387.35 mm; P180°:48.9 kN; J1:60.325 mm; P60°:119 kN; Bearing limiting speed:4500 r/min; Cap bolt recommended tightening torque:203.4 N·m; Bearing:22220 EK; P150°:40 kN; PG:1/4 NPT;

d:9 mm; Mass inner ring:0.0044 kg; r, r1,2 min.:0.3 mm; B:12 mm; F:12 mm;

b1:42.6 mm; Pu:175.330 kN; b:19.6 mm; Dynamic (Ca):1470 kN; rs (min):5 mm; B:90 mm; r1s (min):5 mm; d2 (max):470 mm; E:mm; D:600 mm;

Da max.:580 mm; F:422 mm; Calculation factor kr:0.36; d:360 mm; s max.:5.9 mm; da max.:414 mm; Reference speed:900 r/min; Mass bearing:275 kg; D:600 mm; Limiting speed:1100 r/min;

Housing:FSAF 520; L:387.35 mm; P180°:48.9 kN; J1:60.325 mm; P60°:119 kN; Bearing limiting speed:4500 r/min; Cap bolt recommended tightening torque:203.4 N·m; Bearing:22220 EK; P150°:40 kN; PG:1/4 NPT;

b1:42.6 mm; Pu:175.330 kN; b:19.6 mm; Dynamic (Ca):1470 kN; rs (min):5 mm; B:90 mm; r1s (min):5 mm; d2 (max):470 mm; E:mm; D:600 mm;

b1:42.6 mm; Pu:175.330 kN; b:19.6 mm; Dynamic (Ca):1470 kN; rs (min):5 mm; B:90 mm; r1s (min):5 mm; d2 (max):470 mm; E:mm; D:600 mm;

B:140 mm; Tolerance shaft:e7; Permissible sliding velocity v min.:0 m/s; a:7 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:9.68 kg; Specific dynamic load factor K:25 N/mm²; d:240 mm; h:242.5 mm;