[50 PCS] (ZrO2) (6mm 0.2362) Ceramic Zirconia Oxide Bearing Ball G5

Stabilizing ring:SR-44-38; Housing:SAF 638; A1:222.25 mm; H1:241.3 mm; P60°:423 kN; RG:1 NPT; Eye bolt:2 x 1/2-13 UNC; Cap bolt:4 x 1-8 UNC; P180°:173 kN; Cap bolt, SAE grade:5;

P90°:82.7 kN; Appropriate attachment bolt size G:0.75 in; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; H2:31.75 mm; A2:215.9 mm; P120°:49.8 kN; Ca:42.799 mm; Pa:7.83 kN; R1:53.181 mm;

Stabilizing ring:SR-44-38; Housing:SAF 638; A1:222.25 mm; H1:241.3 mm; P60°:423 kN; RG:1 NPT; Eye bolt:2 x 1/2-13 UNC; Cap bolt:4 x 1-8 UNC; P180°:173 kN; Cap bolt, SAE grade:5;

rs Dynamic (Cr):2.1 mm; Static (Cor):81.680 kN; D:160 mm; B1:mm; B:37 mm; d:75 mm; with tapered bore:1315  ; Oil:3 800 min-1; Pu:29.900 kN; Grease:1.230 kN;

Da max.:580 mm; F:422 mm; Calculation factor kr:0.36; d:360 mm; s max.:5.9 mm; da max.:414 mm; Reference speed:900 r/min; Mass bearing:275 kg; D:600 mm; Limiting speed:1100 r/min;

B:48.666 mm; Threads per inch:5; d3 max.:450.977 mm; Sleeve:S 3176x13.15/16; G:378.993 mm; B5:59.766 mm; Hydraulic nut:HMVC 76E; Lock nut:N 076; d:380 mm; d1:354.012 mm;

d:9 mm; Mass inner ring:0.0044 kg; r, r1,2 min.:0.3 mm; B:12 mm; F:12 mm;

D:200 mm; Dynamic (Cr):4.5 mm; with cylindrical bore:1 700 min-1; Oil:50.680 kN; B:53 mm; Pu:365 kN; rs (min):2.1 mm; Grease:474 kN; d:110 mm; Static (Cor):8.3 mm;

Da max.:580 mm; F:422 mm; Calculation factor kr:0.36; d:360 mm; s max.:5.9 mm; da max.:414 mm; Reference speed:900 r/min; Mass bearing:275 kg; D:600 mm; Limiting speed:1100 r/min;

B:48.666 mm; Threads per inch:5; d3 max.:450.977 mm; Sleeve:S 3176x13.15/16; G:378.993 mm; B5:59.766 mm; Hydraulic nut:HMVC 76E; Lock nut:N 076; d:380 mm; d1:354.012 mm;

P90°:82.7 kN; Appropriate attachment bolt size G:0.75 in; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; H2:31.75 mm; A2:215.9 mm; P120°:49.8 kN; Ca:42.799 mm; Pa:7.83 kN; R1:53.181 mm;

Recommended grub screw tightening torque:8 N·m; B3:3 mm; Mass lock nut:0.12 kg; d3:58 mm; Grub (set) screw size:M6; b:6 mm; Axial static load carrying capacity:62 kN; G:M 40x1.5; Associated spanner:HN 8-9; h:2.5 mm;

B:75 mm; r2 min.:1 mm; da max.:87.2 mm; da min.:87.2 mm; Sealing solution:Triple-lip seals; d:80 mm; Lubricant:Regular relubricatio; D:130 mm; Mass plain bearing:4.1 kg; Design (sliding contact surface combination):Steel/steel, heavy-d;

P90°:82.7 kN; Appropriate attachment bolt size G:0.75 in; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; H2:31.75 mm; A2:215.9 mm; P120°:49.8 kN; Ca:42.799 mm; Pa:7.83 kN; R1:53.181 mm;

P90°:82.7 kN; Appropriate attachment bolt size G:0.75 in; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; H2:31.75 mm; A2:215.9 mm; P120°:49.8 kN; Ca:42.799 mm; Pa:7.83 kN; R1:53.181 mm;