[QTY 50] [3.5mm] Loose Bearing Ball SS304 304 Stainless Steel Bearings Balls

Housing:FSAF 520; L:387.35 mm; P180°:48.9 kN; J1:60.325 mm; P60°:119 kN; Bearing limiting speed:4500 r/min; Cap bolt recommended tightening torque:203.4 N·m; Bearing:22220 EK; P150°:40 kN; PG:1/4 NPT;

Taconite seal:TER 122; Initial grease fill:878.85 g; da:125.412 mm; Mass pillow block:134 kg; Adapter sleeve assembly:SNW 128x4.15/16; Cap bolt, SAE grade:5; A2:307.975 mm; N1:28.575 mm; P60°:234 kN; S:4.763 mm;

d:9 mm; Mass inner ring:0.0044 kg; r, r1,2 min.:0.3 mm; B:12 mm; F:12 mm;

P90°:82.7 kN; Appropriate attachment bolt size G:0.75 in; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; H2:31.75 mm; A2:215.9 mm; P120°:49.8 kN; Ca:42.799 mm; Pa:7.83 kN; R1:53.181 mm;

rs Dynamic (Cr):2.1 mm; Static (Cor):81.680 kN; D:160 mm; B1:mm; B:37 mm; d:75 mm; with tapered bore:1315  ; Oil:3 800 min-1; Pu:29.900 kN; Grease:1.230 kN;

B:75 mm; r2 min.:1 mm; da max.:87.2 mm; da min.:87.2 mm; Sealing solution:Triple-lip seals; d:80 mm; Lubricant:Regular relubricatio; D:130 mm; Mass plain bearing:4.1 kg; Design (sliding contact surface combination):Steel/steel, heavy-d;

B:140 mm; Tolerance shaft:e7; Permissible sliding velocity v min.:0 m/s; a:7 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:9.68 kg; Specific dynamic load factor K:25 N/mm²; d:240 mm; h:242.5 mm;

D:200 mm; Dynamic (Cr):4.5 mm; with cylindrical bore:1 700 min-1; Oil:50.680 kN; B:53 mm; Pu:365 kN; rs (min):2.1 mm; Grease:474 kN; d:110 mm; Static (Cor):8.3 mm;

Housing:FSAF 520; L:387.35 mm; P180°:48.9 kN; J1:60.325 mm; P60°:119 kN; Bearing limiting speed:4500 r/min; Cap bolt recommended tightening torque:203.4 N·m; Bearing:22220 EK; P150°:40 kN; PG:1/4 NPT;

d:9 mm; Mass inner ring:0.0044 kg; r, r1,2 min.:0.3 mm; B:12 mm; F:12 mm;

D:200 mm; Dynamic (Cr):4.5 mm; with cylindrical bore:1 700 min-1; Oil:50.680 kN; B:53 mm; Pu:365 kN; rs (min):2.1 mm; Grease:474 kN; d:110 mm; Static (Cor):8.3 mm;

Da max.:580 mm; F:422 mm; Calculation factor kr:0.36; d:360 mm; s max.:5.9 mm; da max.:414 mm; Reference speed:900 r/min; Mass bearing:275 kg; D:600 mm; Limiting speed:1100 r/min;

B:75 mm; r2 min.:1 mm; da max.:87.2 mm; da min.:87.2 mm; Sealing solution:Triple-lip seals; d:80 mm; Lubricant:Regular relubricatio; D:130 mm; Mass plain bearing:4.1 kg; Design (sliding contact surface combination):Steel/steel, heavy-d;

d:180 mm; H:34 mm; dynamic Cr:165.640 kN; Grease:1 100 min-1; Oil:1 500 min-1; rs (min):1.1 mm; Pu:20.410 kN; D1:185 mm; static Cor:639.000 kN; D:225 mm;