[4 pcs] S623c 3x10x4 mm Hybrid Stainless Steel Ceramic Ball Bearing (ABEC 7)

h:44.45 mm; R2:38.1 mm; da:152.4 mm; Mass pillow block:87.5 kg; Cap bolt, SAE grade:8; J min.:406.4 mm; PG:1/4 NPT; P90°:180 kN; A1:149.225 mm; Da:259.999 mm;

with cylindrical bore:670 min-1; Grease:4280 kN; rs (min):4 mm; Static (Cor):11.1 mm; d:280 mm; with tapered bore:850 min-1; D:420 mm; Dynamic (Cr):6 mm; B:140 mm; Pu:2240 kN;

b:8.3 mm; G:M 70x2; Calculation factor e:0.35; Limiting speed:5000 r/min; B1:61 mm; Fatigue load limit Pu:38 kN; D:140 mm; K:4.5 mm; G1:12 mm; B2 ≈:64 mm;

Associated eyebolt for handling:M 10; d3:780 mm; b:45 mm; Lock washer / Locking clip:MS 30/670; Associated spanner:TMFN 600-750; d2:703 mm; G:Tr 670x6; d1:740 mm; B5:102 mm; h:20 mm;

d1:820.75 mm; Threads per inch:3; Mass lock nut:107 kg; h:25.654 mm; B:90.881 mm; d3 max.:870.077 mm; b:56.642 mm; G:750.214 mm; Locking device:PL 750; B5:105.893 mm;

P120°:127 kN; S:4.763 mm; Pa:43.6 kN; ba:74.612 mm; P150°:113 kN; A1:171.45 mm; Ca:95.809 mm; Cap bolt:1-8 UNC; P60°:345 kN; Adapter sleeve assembly:SNW 34x5.13/16;

Oil:4 200 min-1; Dynamic (Cr):144.000 kN; Da:176 max; Bearing designation:6318  ; ra:2.5 max; B:43 mm; rs:3 mm; da:103 min; Static (Cor):108.000 kN; Pu:4.149 kN;

b:8.3 mm; G:M 70x2; Calculation factor e:0.35; Limiting speed:5000 r/min; B1:61 mm; Fatigue load limit Pu:38 kN; D:140 mm; K:4.5 mm; G1:12 mm; B2 ≈:64 mm;

Oil:4 200 min-1; Dynamic (Cr):144.000 kN; Da:176 max; Bearing designation:6318  ; ra:2.5 max; B:43 mm; rs:3 mm; da:103 min; Static (Cor):108.000 kN; Pu:4.149 kN;

P120°:127 kN; S:4.763 mm; Pa:43.6 kN; ba:74.612 mm; P150°:113 kN; A1:171.45 mm; Ca:95.809 mm; Cap bolt:1-8 UNC; P60°:345 kN; Adapter sleeve assembly:SNW 34x5.13/16;

d:75.000 mm; B:71.40 mm; Oil Speed Rating n2:3600 rpm; Basic Static Radial Load Rating Co:140000 N; D:160.0000 mm; Basic Dynamic Radial Load Rating C:168000 N; Sealed Speed Rating n3:2600 rpm; Grease Speed Rating n1:2600 rpm; Fillet Radius ra:2.00 mm; Accessories:One Seal;

h:44.45 mm; R2:38.1 mm; da:152.4 mm; Mass pillow block:87.5 kg; Cap bolt, SAE grade:8; J min.:406.4 mm; PG:1/4 NPT; P90°:180 kN; A1:149.225 mm; Da:259.999 mm;

b:8.3 mm; G:M 70x2; Calculation factor e:0.35; Limiting speed:5000 r/min; B1:61 mm; Fatigue load limit Pu:38 kN; D:140 mm; K:4.5 mm; G1:12 mm; B2 ≈:64 mm;

d:31.75 mm; Hexagonal key size for grub screw N:3.175 mm; A1:25 mm; Housing:SYWK 506 Y; Recommended diameter for attachment bolts, inch G:0.5 in; A:40 mm; B4:5 mm; J:121 mm; Bearing:YAR 206-104-2RF/VE49; Recommended diameter for attachment bolts, mm G:12 mm;

d:130.000 mm; D:180.0000 mm; B:24.00 mm; Basic Dynamic Radial Load Rating C:65000 N; Accessories:Two Seals; Fillet Radius ra:1.50 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; Oil Speed Rating Open/Shielded n2:4000 rpm; Sealed Speed Rating n3:2100 rpm; Basic Static Radial Load Rating Co:67000 N;