[QTY 4] 6903-2RS (17x30x7 mm) Hybrid Ceramic Rubber Ball Bearing Bearings 6903RS

Associated eyebolt for handling:M 10; d3:780 mm; b:45 mm; Lock washer / Locking clip:MS 30/670; Associated spanner:TMFN 600-750; d2:703 mm; G:Tr 670x6; d1:740 mm; B5:102 mm; h:20 mm;

P120°:127 kN; S:4.763 mm; Pa:43.6 kN; ba:74.612 mm; P150°:113 kN; A1:171.45 mm; Ca:95.809 mm; Cap bolt:1-8 UNC; P60°:345 kN; Adapter sleeve assembly:SNW 34x5.13/16;

d:75.000 mm; B:71.40 mm; Oil Speed Rating n2:3600 rpm; Basic Static Radial Load Rating Co:140000 N; D:160.0000 mm; Basic Dynamic Radial Load Rating C:168000 N; Sealed Speed Rating n3:2600 rpm; Grease Speed Rating n1:2600 rpm; Fillet Radius ra:2.00 mm; Accessories:One Seal;

s1:22.2 mm; Calculation factor f0:14; d:30.163 mm; Rubber seating ring:RIS 206 A; Limiting speed1):3800 r/min; Fatigue load limit Pu:0.475 kN; C:18 mm; Hexagonal key size for grub screw N:3.175 mm; D:62 mm; Mass complete bearing:0.3 kg;

Appropriate attachment bolt size G:0.75 in; RG:3/8 NPT; End plug (suffix Y):EPR 14; Pa:16.7 kN; Housing:FSAF 024 KA; A1:111.125 mm; Adapter sleeve assembly:SNW 3024x4.1/4; Cap bolt:2 x 3/4-10 UNC; P120°:44.5 kN; Initial grease fill:181.44 g;

d:31.75 mm; Hexagonal key size for grub screw N:3.175 mm; A1:25 mm; Housing:SYWK 506 Y; Recommended diameter for attachment bolts, inch G:0.5 in; A:40 mm; B4:5 mm; J:121 mm; Bearing:YAR 206-104-2RF/VE49; Recommended diameter for attachment bolts, mm G:12 mm;

Associated eyebolt for handling:M 10; d3:780 mm; b:45 mm; Lock washer / Locking clip:MS 30/670; Associated spanner:TMFN 600-750; d2:703 mm; G:Tr 670x6; d1:740 mm; B5:102 mm; h:20 mm;

d:75.000 mm; B:71.40 mm; Oil Speed Rating n2:3600 rpm; Basic Static Radial Load Rating Co:140000 N; D:160.0000 mm; Basic Dynamic Radial Load Rating C:168000 N; Sealed Speed Rating n3:2600 rpm; Grease Speed Rating n1:2600 rpm; Fillet Radius ra:2.00 mm; Accessories:One Seal;

d:31.75 mm; Hexagonal key size for grub screw N:3.175 mm; A1:25 mm; Housing:SYWK 506 Y; Recommended diameter for attachment bolts, inch G:0.5 in; A:40 mm; B4:5 mm; J:121 mm; Bearing:YAR 206-104-2RF/VE49; Recommended diameter for attachment bolts, mm G:12 mm;

Appropriate attachment bolt size G:0.75 in; RG:3/8 NPT; End plug (suffix Y):EPR 14; Pa:16.7 kN; Housing:FSAF 024 KA; A1:111.125 mm; Adapter sleeve assembly:SNW 3024x4.1/4; Cap bolt:2 x 3/4-10 UNC; P120°:44.5 kN; Initial grease fill:181.44 g;

Tolerance shaft:h8; d:60 mm; Coefficient of friction µ min.:0.05; B:70 mm; Specific dynamic load factor K:10 N/mm²; Mass bushing:0.35 kg; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; Coefficient of friction µ max.:0.1; Permissible sliding velocity v max.:5 m/s;

Appropriate attachment bolt size G:0.75 in; RG:3/8 NPT; End plug (suffix Y):EPR 14; Pa:16.7 kN; Housing:FSAF 024 KA; A1:111.125 mm; Adapter sleeve assembly:SNW 3024x4.1/4; Cap bolt:2 x 3/4-10 UNC; P120°:44.5 kN; Initial grease fill:181.44 g;

Tolerance shaft:h8; d:60 mm; Coefficient of friction µ min.:0.05; B:70 mm; Specific dynamic load factor K:10 N/mm²; Mass bushing:0.35 kg; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; Coefficient of friction µ max.:0.1; Permissible sliding velocity v max.:5 m/s;

Associated eyebolt for handling:M 10; d3:780 mm; b:45 mm; Lock washer / Locking clip:MS 30/670; Associated spanner:TMFN 600-750; d2:703 mm; G:Tr 670x6; d1:740 mm; B5:102 mm; h:20 mm;

Associated eyebolt for handling:M 10; d3:780 mm; b:45 mm; Lock washer / Locking clip:MS 30/670; Associated spanner:TMFN 600-750; d2:703 mm; G:Tr 670x6; d1:740 mm; B5:102 mm; h:20 mm;