Yamaha YZ 450 FT (4T) (3rd Gen) (5XD6) 2005 Koyo Front Right Wheel Bearing

Accessories:One Seal & Snap-Ring; Fillet Radius ra:1.00 mm; D:62.0000 mm; Basic Static Radial Load Rating Co:28000 N; B:27.00 mm; Oil Speed Rating n2:9500 rpm; Sealed Speed Rating n3:7000 rpm; Grease Speed Rating n1:7000 rpm; Basic Dynamic Radial Load Rating C:30300 N; d:30.000 mm;

Db:35.6 mm; Limiting speed:13000 r/min; F:35 mm; Da:42.5 mm; db:34.5 mm; D:47 mm; Basic dynamic load rating C:23.3 kN; s max.:0.8 mm; B:16 mm; Fatigue load limit Pu:4.5 kN;

G:M 75x2; d1:65 mm; d:70 mm; Nut for removal:KM 15; Mass withdrawal sleeve:0.24 kg; G1:8 mm; Hydraulic nut:HMV 15 E; B2:47 mm; B1:43 mm;

Fillet Radius ra:0.30 mm; B:10.00 mm; Oil Speed Rating n2:25000 rpm; Grease Speed Rating n1:0 rpm; Basic Static Radial Load Rating Co:4250 N; d:17.000 mm; D:35.0000 mm; Fillet Radius rb:0.10 mm; Basic Dynamic Radial Load Rating C:7610 N;

H2:53.975 mm; Ca:67.793 mm; Initial grease fill:379.89 g; Adapter sleeve assembly:SNW 24x4.1/8; da:104.775 mm; Da:215.001 mm; Cap bolt recommended tightening torque:298.3 N·m; Bearing limiting speed:3800 r/min; End plug (suffix Y):EPR 14; Bearing:22224 EK;

Dw:2 mm; r2 max.:0.8 mm; r1 max.:0.6 mm; Mass needle roller:0.24 g; Lw:9.8 mm; r1,2 min.:0.2 mm;

Dw:2 mm; r2 max.:0.8 mm; r1 max.:0.6 mm; Mass needle roller:0.24 g; Lw:9.8 mm; r1,2 min.:0.2 mm;

Dw:2 mm; r2 max.:0.8 mm; r1 max.:0.6 mm; Mass needle roller:0.24 g; Lw:9.8 mm; r1,2 min.:0.2 mm;

Dw:2 mm; r2 max.:0.8 mm; r1 max.:0.6 mm; Mass needle roller:0.24 g; Lw:9.8 mm; r1,2 min.:0.2 mm;

Dw:2 mm; r2 max.:0.8 mm; r1 max.:0.6 mm; Mass needle roller:0.24 g; Lw:9.8 mm; r1,2 min.:0.2 mm;

M1:7 mm; B:60 mm; M:21 mm; Spring washer in accordance with DIN 128:A 20; M2:44 mm; M3:22 mm; Mass locking clip:0.26 kg; Hexagonal head bolt:M 20x40;

Accessories:One Seal & Snap-Ring; Fillet Radius ra:1.00 mm; D:62.0000 mm; Basic Static Radial Load Rating Co:28000 N; B:27.00 mm; Oil Speed Rating n2:9500 rpm; Sealed Speed Rating n3:7000 rpm; Grease Speed Rating n1:7000 rpm; Basic Dynamic Radial Load Rating C:30300 N; d:30.000 mm;

d:65 mm; Grease:351 kN; Dynamic (Cr):3 mm; rs (min):2.1 mm; B:48 mm; with tapered bore:3 400 min-1; with cylindrical bore:2 600 min-1; Static (Cor):5.5 mm; D:140 mm; Oil:42.180 kN;

H2:53.975 mm; Ca:67.793 mm; Initial grease fill:379.89 g; Adapter sleeve assembly:SNW 24x4.1/8; da:104.775 mm; Da:215.001 mm; Cap bolt recommended tightening torque:298.3 N·m; Bearing limiting speed:3800 r/min; End plug (suffix Y):EPR 14; Bearing:22224 EK;

Fillet Radius ra:0.30 mm; B:10.00 mm; Oil Speed Rating n2:25000 rpm; Grease Speed Rating n1:0 rpm; Basic Static Radial Load Rating Co:4250 N; d:17.000 mm; D:35.0000 mm; Fillet Radius rb:0.10 mm; Basic Dynamic Radial Load Rating C:7610 N;