[4 PCS] (Si3N4) (11.113mm 0.4375 716) Ceramic Silicon Nitride Bearing Ball G5

Mass inner ring:0.0049 kg; d:7 mm; F:10 mm; B:16 mm; r, r1,2 min.:0.3 mm;

d:65 mm; Grease:351 kN; Dynamic (Cr):3 mm; rs (min):2.1 mm; B:48 mm; with tapered bore:3 400 min-1; with cylindrical bore:2 600 min-1; Static (Cor):5.5 mm; D:140 mm; Oil:42.180 kN;

d:65 mm; Grease:351 kN; Dynamic (Cr):3 mm; rs (min):2.1 mm; B:48 mm; with tapered bore:3 400 min-1; with cylindrical bore:2 600 min-1; Static (Cor):5.5 mm; D:140 mm; Oil:42.180 kN;

Fillet Radius ra:0.30 mm; B:10.00 mm; Oil Speed Rating n2:25000 rpm; Grease Speed Rating n1:0 rpm; Basic Static Radial Load Rating Co:4250 N; d:17.000 mm; D:35.0000 mm; Fillet Radius rb:0.10 mm; Basic Dynamic Radial Load Rating C:7610 N;

Initial grease fill:82.215 g; R2:17.462 mm; Max. speed for Taconite seal:2175 r/min; P60°:35.1 kN; PG:1/8 NPT; H:134.938 mm; ba:25.4 mm; Cap bolt recommended tightening torque:149.1 N·m; P180°:14.7 kN; A1:69.85 mm;

G:M 75x2; d1:65 mm; d:70 mm; Nut for removal:KM 15; Mass withdrawal sleeve:0.24 kg; G1:8 mm; Hydraulic nut:HMV 15 E; B2:47 mm; B1:43 mm;

G:M 75x2; d1:65 mm; d:70 mm; Nut for removal:KM 15; Mass withdrawal sleeve:0.24 kg; G1:8 mm; Hydraulic nut:HMV 15 E; B2:47 mm; B1:43 mm;

Mass inner ring:0.0049 kg; d:7 mm; F:10 mm; B:16 mm; r, r1,2 min.:0.3 mm;

Grease Speed Rating Open/Shielded n1:3600 rpm; d:130.000 mm; D:165.0000 mm; Basic Dynamic Radial Load Rating C:37700 N; Basic Static Radial Load Rating Co:43000 N; Accessories:One Shield; B:18.00 mm; Sealed Speed Rating n3:2200 rpm; Oil Speed Rating Open/Shielded n2:4300 rpm; Fillet Radius ra:1.00 mm;

M1:7 mm; B:60 mm; M:21 mm; Spring washer in accordance with DIN 128:A 20; M2:44 mm; M3:22 mm; Mass locking clip:0.26 kg; Hexagonal head bolt:M 20x40;

H2:53.975 mm; Ca:67.793 mm; Initial grease fill:379.89 g; Adapter sleeve assembly:SNW 24x4.1/8; da:104.775 mm; Da:215.001 mm; Cap bolt recommended tightening torque:298.3 N·m; Bearing limiting speed:3800 r/min; End plug (suffix Y):EPR 14; Bearing:22224 EK;

H2:53.975 mm; Ca:67.793 mm; Initial grease fill:379.89 g; Adapter sleeve assembly:SNW 24x4.1/8; da:104.775 mm; Da:215.001 mm; Cap bolt recommended tightening torque:298.3 N·m; Bearing limiting speed:3800 r/min; End plug (suffix Y):EPR 14; Bearing:22224 EK;

d:65 mm; Grease:351 kN; Dynamic (Cr):3 mm; rs (min):2.1 mm; B:48 mm; with tapered bore:3 400 min-1; with cylindrical bore:2 600 min-1; Static (Cor):5.5 mm; D:140 mm; Oil:42.180 kN;

d:65 mm; Grease:351 kN; Dynamic (Cr):3 mm; rs (min):2.1 mm; B:48 mm; with tapered bore:3 400 min-1; with cylindrical bore:2 600 min-1; Static (Cor):5.5 mm; D:140 mm; Oil:42.180 kN;

Initial grease fill:82.215 g; R2:17.462 mm; Max. speed for Taconite seal:2175 r/min; P60°:35.1 kN; PG:1/8 NPT; H:134.938 mm; ba:25.4 mm; Cap bolt recommended tightening torque:149.1 N·m; P180°:14.7 kN; A1:69.85 mm;