Yamaha YXR 660 FAT Rhino (5UG5) 2005 Koyo Rear Left Wheel Bearing

Adapter sleeve assembly:SNW 7x1.1/4; Taconite seal:TER 15; Initial grease fill:36.855 g; A2:153.988 mm; R2:12.7 mm; Cap bolt, SAE grade:5; H1:50.8 mm; J max.:155.575 mm; Max. speed for Taconite seal:2250 r/min; H2:20.637 mm;

P90°:207 kN; P120°:133 kN; RG:3/4 NPT; A1:158.75 mm; PG:1/4 NPT; Stabilizing ring:2 x 38151-38; Pa:42.9 kN; Cap bolt recommended tightening torque:813.5 N·m; Initial grease fill:793.8 g; A2:225.425 mm;

ra max.:1 mm; da max.:78 mm; Da max.:104 mm; Mass bearing:0.53 kg; Calculation factor kr:0.1; Basic static load rating C0:93 kN; d:70 mm; s max.:1.3 mm; Fatigue load limit Pu:12 kN; B:20 mm;

P90°:207 kN; P120°:133 kN; RG:3/4 NPT; A1:158.75 mm; PG:1/4 NPT; Stabilizing ring:2 x 38151-38; Pa:42.9 kN; Cap bolt recommended tightening torque:813.5 N·m; Initial grease fill:793.8 g; A2:225.425 mm;

P90°:207 kN; P120°:133 kN; RG:3/4 NPT; A1:158.75 mm; PG:1/4 NPT; Stabilizing ring:2 x 38151-38; Pa:42.9 kN; Cap bolt recommended tightening torque:813.5 N·m; Initial grease fill:793.8 g; A2:225.425 mm;

Number of balls z:21; B:16 mm; Calculation factor f2C:1.06; Calculation factor f:1.08; Mass bearing:0.25 kg; Calculation factor (back-to-back, face-to-face) Y1:0.92; K:0.5 mm; D:80 mm; Preload class C GC:800 N; r1,2 min.:1 mm;

D:130 mm; d2:60 mm; b:9 mm; rs (min):2.1 mm; b1:15.5 mm; Pu:13.900 kN; E:113 mm; r1s (min):2.1 mm; F:77 mm; B:31 mm;

D:130 mm; d2:60 mm; b:9 mm; rs (min):2.1 mm; b1:15.5 mm; Pu:13.900 kN; E:113 mm; r1s (min):2.1 mm; F:77 mm; B:31 mm;

Mass bearing unit:45.5 kg; J max.:412.75 mm; L:469.9 mm; B:168.275 mm; H1:139.7 mm; J min.:384.175 mm; s:84.138 mm; H:280.988 mm; Attachment bolt diameter G:22.225 mm; H2:79.375 mm;

Reference speed:1500 r/min; Basic static load rating C0:850 kN; Ew:280 mm; Limiting speed:1700 r/min; Fw:265 mm; Mass needle roller and cage assembly:1.81 kg; Basic dynamic load rating C:242 kN; Fatigue load limit Pu:83 kN; U:50 mm;

Mass bearing unit:45.5 kg; J max.:412.75 mm; L:469.9 mm; B:168.275 mm; H1:139.7 mm; J min.:384.175 mm; s:84.138 mm; H:280.988 mm; Attachment bolt diameter G:22.225 mm; H2:79.375 mm;

ra max.:1 mm; da max.:78 mm; Da max.:104 mm; Mass bearing:0.53 kg; Calculation factor kr:0.1; Basic static load rating C0:93 kN; d:70 mm; s max.:1.3 mm; Fatigue load limit Pu:12 kN; B:20 mm;

Adapter sleeve assembly:SNW 7x1.1/4; Taconite seal:TER 15; Initial grease fill:36.855 g; A2:153.988 mm; R2:12.7 mm; Cap bolt, SAE grade:5; H1:50.8 mm; J max.:155.575 mm; Max. speed for Taconite seal:2250 r/min; H2:20.637 mm;

Reference speed:1500 r/min; Basic static load rating C0:850 kN; Ew:280 mm; Limiting speed:1700 r/min; Fw:265 mm; Mass needle roller and cage assembly:1.81 kg; Basic dynamic load rating C:242 kN; Fatigue load limit Pu:83 kN; U:50 mm;

Number of balls z:21; B:16 mm; Calculation factor f2C:1.06; Calculation factor f:1.08; Mass bearing:0.25 kg; Calculation factor (back-to-back, face-to-face) Y1:0.92; K:0.5 mm; D:80 mm; Preload class C GC:800 N; r1,2 min.:1 mm;