NIB FAFNIR 202KLD BEARING SEALED BOTH SIDES 202 KLD 202K LD 15mm ID 35mm OD

B:9.5 mm; Mass shaft washer:0.8 kg; d:150 mm; r1,2 min.:1 mm; d1:188 mm;

P120°:85.9 kN; L:628.65 mm; PosiTrac Plus contact element:2 x B10724-122; RG:3/4 NPT; Stabilizing ring:SR-0-28; A1:171.45 mm; N1:28.575 mm; PG:1/4 NPT; P180°:92.5 kN; P60°:234 kN;

E:mm; Static (Coa):203 kN; D:200 mm; b1:mm; B:33 mm; r1s (min):1.1 mm; rs (min):2 mm; d2 (max):mm; Dynamic (Ca):162 kN; b:mm;

Fatigue load limit Pu:285 kN; Basic dynamic load rating C:2485 kN; Calculation factor Y0:1.8; Da max.:383 mm; D:400 mm; B1:181 mm; Mass bearing + sleeve:93 kg; Calculation factor Y2:2.9; G1:30 mm; B:144 mm;

Reference speed:1500 r/min; Basic static load rating C0:850 kN; Ew:280 mm; Limiting speed:1700 r/min; Fw:265 mm; Mass needle roller and cage assembly:1.81 kg; Basic dynamic load rating C:242 kN; Fatigue load limit Pu:83 kN; U:50 mm;

E:mm; Static (Coa):203 kN; D:200 mm; b1:mm; B:33 mm; r1s (min):1.1 mm; rs (min):2 mm; d2 (max):mm; Dynamic (Ca):162 kN; b:mm;

Adapter sleeve assembly:SNW 7x1.1/4; Taconite seal:TER 15; Initial grease fill:36.855 g; A2:153.988 mm; R2:12.7 mm; Cap bolt, SAE grade:5; H1:50.8 mm; J max.:155.575 mm; Max. speed for Taconite seal:2250 r/min; H2:20.637 mm;

E:mm; Static (Coa):203 kN; D:200 mm; b1:mm; B:33 mm; r1s (min):1.1 mm; rs (min):2 mm; d2 (max):mm; Dynamic (Ca):162 kN; b:mm;

ra max.:1 mm; da max.:78 mm; Da max.:104 mm; Mass bearing:0.53 kg; Calculation factor kr:0.1; Basic static load rating C0:93 kN; d:70 mm; s max.:1.3 mm; Fatigue load limit Pu:12 kN; B:20 mm;

E:mm; Static (Coa):203 kN; D:200 mm; b1:mm; B:33 mm; r1s (min):1.1 mm; rs (min):2 mm; d2 (max):mm; Dynamic (Ca):162 kN; b:mm;

Basic Dynamic Radial Load Rating C:92300 N; Grease Speed Rating n1:4800 rpm; Accessories:Seal & Snap-Ring; d:65.000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; Basic Static Radial Load Rating Co:60000 N; Grease Speed Rating Open/Shielded n1:4800 rpm; B:33.00 mm; Sealed Speed Rating n3:3200 rpm;

Reference speed:1500 r/min; Basic static load rating C0:850 kN; Ew:280 mm; Limiting speed:1700 r/min; Fw:265 mm; Mass needle roller and cage assembly:1.81 kg; Basic dynamic load rating C:242 kN; Fatigue load limit Pu:83 kN; U:50 mm;

D:130 mm; d2:60 mm; b:9 mm; rs (min):2.1 mm; b1:15.5 mm; Pu:13.900 kN; E:113 mm; r1s (min):2.1 mm; F:77 mm; B:31 mm;

E:mm; Static (Coa):203 kN; D:200 mm; b1:mm; B:33 mm; r1s (min):1.1 mm; rs (min):2 mm; d2 (max):mm; Dynamic (Ca):162 kN; b:mm;