Bidirectional thrust tapered roller bearings 180TFD4001

d:10 mm; Mass inner ring:0.0074 kg; F:14 mm; r, r1,2 min.:0.3 mm; B:13 mm;

L1:100 mm; H:185 mm; Recommended tightening torque for grub screw:16.5 N·m; B:51.6 mm; End cover:ECL 210; T:56.6 mm; Housing material:Composite for food a; Recommended diameter for attachment bolts, inch G:0.5 in; Housing:FYAWK 510 L; Mass bearing unit:1.15 kg;

ra max.:0.6 mm; M:3 mm; r1 min.:0.6 mm; da max.:56 mm; D:75 mm; Da max.:70.5 mm; Material constant KM:330; b1:4.6 mm; d:50 mm; Lubricant:Regular relubricatio;

L1:100 mm; H:185 mm; Recommended tightening torque for grub screw:16.5 N·m; B:51.6 mm; End cover:ECL 210; T:56.6 mm; Housing material:Composite for food a; Recommended diameter for attachment bolts, inch G:0.5 in; Housing:FYAWK 510 L; Mass bearing unit:1.15 kg;

r3,4 min.:0.6 mm; Calculation factor Y2:1.41; da min.:25.6 mm; d2 ≈:25.766 mm; Calculation factor X:0.67; Da max.:41.4 mm; Fatigue load limit Pu:0.39 kN; Calculation factor Y1:0.92; Calculation factor Y2:0.87; d1 ≈:30.722 mm;

L1:100 mm; H:185 mm; Recommended tightening torque for grub screw:16.5 N·m; B:51.6 mm; End cover:ECL 210; T:56.6 mm; Housing material:Composite for food a; Recommended diameter for attachment bolts, inch G:0.5 in; Housing:FYAWK 510 L; Mass bearing unit:1.15 kg;

H2:44.45 mm; Housing:SSAFS 024 KA; P180°:57.4 kN; Cap bolt:5/8-11 UNC; Pa:16.7 kN; L:387.35 mm; End plug (suffix Y):EPR 14; R1:65.088 mm; A1:111.125 mm; ba:46.831 mm;

Hydraulic nut:HMVC 44E; Lock nut:N 44; B1:183.566 mm; G:219.151 mm; Lock washer:W 44; d:220 mm; B:32.004 mm; Sleeve:S 144x7.7/8; d3 max.:279.527 mm; B4:35.712 mm;

H2:44.45 mm; Housing:SSAFS 024 KA; P180°:57.4 kN; Cap bolt:5/8-11 UNC; Pa:16.7 kN; L:387.35 mm; End plug (suffix Y):EPR 14; R1:65.088 mm; A1:111.125 mm; ba:46.831 mm;

Grease Speed Rating Open/Shielded n1:9000 rpm; d:25.000 mm; Basic Dynamic Radial Load Rating C:35800 N; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:6400 rpm; Oil Speed Rating Open/Shielded n2:11000 rpm; Basic Static Radial Load Rating Co:19300 N; D:80.0000 mm; B:21.00 mm; Accessories:Two Shields;

ra max.:0.6 mm; M:3 mm; r1 min.:0.6 mm; da max.:56 mm; D:75 mm; Da max.:70.5 mm; Material constant KM:330; b1:4.6 mm; d:50 mm; Lubricant:Regular relubricatio;

r3,4 min.:0.6 mm; Calculation factor Y2:1.41; da min.:25.6 mm; d2 ≈:25.766 mm; Calculation factor X:0.67; Da max.:41.4 mm; Fatigue load limit Pu:0.39 kN; Calculation factor Y1:0.92; Calculation factor Y2:0.87; d1 ≈:30.722 mm;

d:10 mm; Mass inner ring:0.0074 kg; F:14 mm; r, r1,2 min.:0.3 mm; B:13 mm;