Bidirectional thrust tapered roller bearings 350TFD5401 

r3,4 min.:0.6 mm; Calculation factor Y2:1.41; da min.:25.6 mm; d2 ≈:25.766 mm; Calculation factor X:0.67; Da max.:41.4 mm; Fatigue load limit Pu:0.39 kN; Calculation factor Y1:0.92; Calculation factor Y2:0.87; d1 ≈:30.722 mm;

H2:44.45 mm; Housing:SSAFS 024 KA; P180°:57.4 kN; Cap bolt:5/8-11 UNC; Pa:16.7 kN; L:387.35 mm; End plug (suffix Y):EPR 14; R1:65.088 mm; A1:111.125 mm; ba:46.831 mm;

B:120.00 mm; Grease Speed Rating n1:2200 rpm; Oil Speed Rating n2:3200 rpm; Basic Dynamic Radial Load Rating 40 AA Pair C1:390000 N; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating 15 B Bearing C2:199000 N; Fillet Radius rb:1.00 mm; d:120.000 mm; Basic Static Radial Load Rating 15 B Bearing Co2:193000 N; Basic Static Radial Load Rating 40 AA Pair Co1:490000 N;

Housing:SSAFS 522; Da:200 mm; L:419.1 mm; P120°:66.7 kN; ba:50.006 mm; P150°:59.6 kN; Max. speed for Taconite seal:775 r/min; Bearing:22222 EK; R2:31.75 mm; H2:52.388 mm;

d:10 mm; Mass inner ring:0.0074 kg; F:14 mm; r, r1,2 min.:0.3 mm; B:13 mm;

ra max.:0.6 mm; M:3 mm; r1 min.:0.6 mm; da max.:56 mm; D:75 mm; Da max.:70.5 mm; Material constant KM:330; b1:4.6 mm; d:50 mm; Lubricant:Regular relubricatio;

L1:100 mm; H:185 mm; Recommended tightening torque for grub screw:16.5 N·m; B:51.6 mm; End cover:ECL 210; T:56.6 mm; Housing material:Composite for food a; Recommended diameter for attachment bolts, inch G:0.5 in; Housing:FYAWK 510 L; Mass bearing unit:1.15 kg;

H2:44.45 mm; Housing:SSAFS 024 KA; P180°:57.4 kN; Cap bolt:5/8-11 UNC; Pa:16.7 kN; L:387.35 mm; End plug (suffix Y):EPR 14; R1:65.088 mm; A1:111.125 mm; ba:46.831 mm;

H2:44.45 mm; Housing:SSAFS 024 KA; P180°:57.4 kN; Cap bolt:5/8-11 UNC; Pa:16.7 kN; L:387.35 mm; End plug (suffix Y):EPR 14; R1:65.088 mm; A1:111.125 mm; ba:46.831 mm;

D:47.0000 mm; Fillet Radius rb:0.60 mm; d:17.000 mm; Basic Dynamic Radial Load Rating C:15900 N; Basic Static Radial Load Rating Co:8650 N; Grease Speed Rating n1:15000 rpm; B:14.00 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:19000 rpm;

Hydraulic nut:HMVC 44E; Lock nut:N 44; B1:183.566 mm; G:219.151 mm; Lock washer:W 44; d:220 mm; B:32.004 mm; Sleeve:S 144x7.7/8; d3 max.:279.527 mm; B4:35.712 mm;

Ew:21 mm; U:10 mm; Mass needle roller and cage assembly:0.0055 kg; Reference speed:22000 r/min; Basic dynamic load rating C:7.81 kN; Basic static load rating C0:10.8 kN; Fw:17 mm; Limiting speed:26000 r/min; Fatigue load limit Pu:1.22 kN;

ra max.:0.6 mm; M:3 mm; r1 min.:0.6 mm; da max.:56 mm; D:75 mm; Da max.:70.5 mm; Material constant KM:330; b1:4.6 mm; d:50 mm; Lubricant:Regular relubricatio;

H2:44.45 mm; Housing:SSAFS 024 KA; P180°:57.4 kN; Cap bolt:5/8-11 UNC; Pa:16.7 kN; L:387.35 mm; End plug (suffix Y):EPR 14; R1:65.088 mm; A1:111.125 mm; ba:46.831 mm;