Bearing 250TQO350-1

d:35 mm; r, r1,2 min.:0.3 mm; B:16.5 mm; Mass inner ring:0.037 kg; F:40 mm;

rb max.:1.5 mm; Ca min.:4 mm; d1 ≈:94.06 mm; Basic dynamic load rating C:155 kN; Reference speed:4300 r/min; Da max.:116.5 mm; Calculation factor e:0.43; Calculation factor Y0:0.8; r1,2 min.:2 mm; r3,4 min.:1.5 mm;

Oil:484.200 kN; Static (Cor):22.3 mm; Dynamic (Cr):12 mm; with tapered bore:800 min-1; B:176 mm; rs (min):5 mm; Grease:6150 kN; d:320 mm; D:540 mm; Pu:3560 kN;

Dynamic (Cr):21.123 kN; Grease:11 000 min-1; ra:1 max; Pu:0.491 kN; Da:55 max; B:24 mm; Weight:0.32 kg; Static (Cor):10.806 kN; rs:1.1 mm; d:25 mm;

Fillet Radius ra:1.00 mm; Oil Speed Rating n2:28000 rpm; d:40.000 mm; D:80.0000 mm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:25000 N; Grease Speed Rating n1:20000 rpm; B:18.00 mm; Basic Dynamic Radial Load Rating C:34500 N;

Basic dynamic load rating C:1460 kN; r1,2 min.:2.1 mm; d:460 mm; Da max.:479 mm; B:24 mm; ra max.:2 mm; Limiting speed:600 r/min; Mass bearing:41 kg; Reference speed:300 r/min; D1:464 mm;

Oil:484.200 kN; Static (Cor):22.3 mm; Dynamic (Cr):12 mm; with tapered bore:800 min-1; B:176 mm; rs (min):5 mm; Grease:6150 kN; d:320 mm; D:540 mm; Pu:3560 kN;

d:35 mm; r, r1,2 min.:0.3 mm; B:16.5 mm; Mass inner ring:0.037 kg; F:40 mm;

Fillet Radius ra:1.00 mm; Oil Speed Rating n2:28000 rpm; d:40.000 mm; D:80.0000 mm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:25000 N; Grease Speed Rating n1:20000 rpm; B:18.00 mm; Basic Dynamic Radial Load Rating C:34500 N;

B:90 mm; Mass lock nut:81 kg; Associated eyebolt for handling:M 12; B3:20 mm; d3:830 mm; Lock washer / Locking clip:MS 30/710; G:Tr 710x7; B5:112 mm; d1:766 mm; Associated spanner:TMFN 600-750;

Basic dynamic load rating C:1460 kN; r1,2 min.:2.1 mm; d:460 mm; Da max.:479 mm; B:24 mm; ra max.:2 mm; Limiting speed:600 r/min; Mass bearing:41 kg; Reference speed:300 r/min; D1:464 mm;

Shaft Diameter D:30 mm; Basic Static Radial Load Rating Co:11200 N; Width A:34.9 mm; Dimension J:7.9 mm; Dimension L:109.5 mm; Dimension G:12.7 mm; Dimension S1:22.2 mm; Pin Dia A1:6.4 mm; Insert Bearing IB:ZMaRC; Dimension C:88.9 mm;

Basic dynamic load rating C:1460 kN; r1,2 min.:2.1 mm; d:460 mm; Da max.:479 mm; B:24 mm; ra max.:2 mm; Limiting speed:600 r/min; Mass bearing:41 kg; Reference speed:300 r/min; D1:464 mm;

Oil:484.200 kN; Static (Cor):22.3 mm; Dynamic (Cr):12 mm; with tapered bore:800 min-1; B:176 mm; rs (min):5 mm; Grease:6150 kN; d:320 mm; D:540 mm; Pu:3560 kN;

P90°:111 kN; Mass pillow block:49.9 kg; Initial grease fill:379.89 g; J min.:336.55 mm; H:257.175 mm; Bearing:23224 CCK/W33; Housing:SAW 524; J1:69.85 mm; H2:53.975 mm; N1:22.225 mm;