FAG HMZ30/710 Bearing

Mass bearing unit:7.85 kg; Limiting speed:3100 r/min; A6:25.4 mm; A5:34.131 mm; N1:17.462 mm; da:61.913 mm; A:69.85 mm; s:31.75 mm; Basic dynamic load rating C:193 kN; J:136.525 mm;

ra max.:1.5 mm; Fatigue load limit Pu:3.05 kN; rb max.:1 mm; Static axial stiffness, preload class D:640 N/µm; d:100 mm; Da max.:143 mm; Basic static load rating C0:80 kN; Db max.:146 mm; Calculation factor f1:0.99; Preload class A GA:500 N;

Da:320 mm; Pa:710 kN; Appropriate attachment bolt, size G:24 mm; Initial grease fill, 40%:1.9 kg; Lock washer:MB 36; End cover:ETS 44; P0°:2200 kN; bc:117.5 mm; H1:190 mm; Labyrinth seal:2 x TS 44;

Basic Static Radial Load Rating Co:40500 N; Grease Speed Rating n1:16000 rpm; Oil Speed Rating n2:22000 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:40300 N; D:80.0000 mm; d:50.000 mm; B:32.00 mm; Fillet Radius rb:0.30 mm;

Specific static load factor K0:45 N/mm²; h:21 mm; Mass bushing:0.079 kg; d:20 mm; Coefficient of friction µ min.:0.08; Tolerance shaft:e7; D:28 mm; Tolerance housing:H7; Permissible sliding velocity v min.:0 m/s; B:30 mm;

Dynamic (Cr):3 mm; D:150 mm; with tapered bore:3 100 min-1; with cylindrical bore:2 400 min-1; Grease:402 kN; d:70 mm; Static (Cor):5.5 mm; B:51 mm; Oil:47.320 kN; rs (min):2.1 mm;

Db min.:82 mm; r3,4 min.:1.5 mm; rb max.:1.5 mm; Da min.:73 mm; da max.:51 mm; db min.:49.5 mm; Mass bearing:1.03 kg; r1,2 min.:2 mm; Ca min.:4 mm; B:33 mm;

Da:320 mm; Pa:710 kN; Appropriate attachment bolt, size G:24 mm; Initial grease fill, 40%:1.9 kg; Lock washer:MB 36; End cover:ETS 44; P0°:2200 kN; bc:117.5 mm; H1:190 mm; Labyrinth seal:2 x TS 44;

Da:320 mm; Pa:710 kN; Appropriate attachment bolt, size G:24 mm; Initial grease fill, 40%:1.9 kg; Lock washer:MB 36; End cover:ETS 44; P0°:2200 kN; bc:117.5 mm; H1:190 mm; Labyrinth seal:2 x TS 44;

ra max.:1.5 mm; Fatigue load limit Pu:3.05 kN; rb max.:1 mm; Static axial stiffness, preload class D:640 N/µm; d:100 mm; Da max.:143 mm; Basic static load rating C0:80 kN; Db max.:146 mm; Calculation factor f1:0.99; Preload class A GA:500 N;

B:26.00 mm; Basic Dynamic Radial Load Rating C:39700 N; Oil Speed Rating n2:18000 rpm; D:90.0000 mm; Basic Static Radial Load Rating Co:48000 N; d:65.000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:12000 rpm; Fillet Radius rb:0.30 mm;

d:20.000 mm; Oil Speed Rating n2:13000 rpm; D:47.0000 mm; Basic Dynamic Radial Load Rating C:19000 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:9000 rpm; Sealed Speed Rating n3:9000 rpm; Basic Static Radial Load Rating Co:12000 N; B:20.60 mm; Accessories:Shield & Seal;

Basic Static Radial Load Rating Co:236000 N; Grease Speed Rating n1:2400 rpm; Fillet Radius ra:2.00 mm; d:80.000 mm; Accessories:No Shield, no Seal; Oil Speed Rating n2:3400 rpm; D:170.0000 mm; Basic Dynamic Radial Load Rating C:201000 N; B:68.30 mm; Sealed Speed Rating n3:2400 rpm;

Basic Static Radial Load Rating Co:236000 N; Grease Speed Rating n1:2400 rpm; Fillet Radius ra:2.00 mm; d:80.000 mm; Accessories:No Shield, no Seal; Oil Speed Rating n2:3400 rpm; D:170.0000 mm; Basic Dynamic Radial Load Rating C:201000 N; B:68.30 mm; Sealed Speed Rating n3:2400 rpm;

Fillet Radius ra:4.00 mm; Basic Static Radial Load Rating Co:780000 N; Basic Dynamic Radial Load Rating C:553000 N; B:80.00 mm; d:200.000 mm; Oil Speed Rating n2:1800 rpm; D:420.0000 mm; Grease Speed Rating n1:1500 rpm; Fillet Radius rb:1.50 mm;